Gemini Popular Questions, Answers, Tips & Manuals

It is strange that both won't open, something common to both, power supply to them? https://www.google.com/search?q=gemini+cdx+602+drawers+won%27t+open ..

measuring that voltage wont tell you a lot of information. You need to see signals in an audio circuit and those transistors could be MOSFET and or they cannot be tested while in circuit.

Much depends on the noise and where it is originating. The deck doesn't seem well thought of and it is unlikely the manufacturer has a spare parts service - unless you have the skills needed to locate and rectify the "noise", which could be electrical, electronic or mechanical, and otherwise restore the deck it would seem advisable to replace it.

What is a G switch?

http://elektrotricks.blogspot.com/ http://electrotechnician.blogspot.com/ http://electronicshelponline.blogspot.com/ http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ Please visit these sites to get some details..

Given the relatively low cost of electronics these days it is more cost effective to replace than have repaired. Check it out.

Sorry we have no way to know were you are so how can we recommend a place to buy it?

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

It depends on what connections the laptop has. Most have an audio in socket. So you can use that. All you need is to find a audio out on the deck. I looked at an illustration and it has an headphone socket. So you could use that. Just keep the volume control low.

Well this website is showing the picture of it, but you will have to enquire if they are still selling it. It will just slide on and a screw will tighten it up. http://www.trusound.co.uk/P/409/Gemini+TWMT-3601604+Tonearm+Counterweight+ I can't find on the net anyone else selling parts for this model, still.

Check motor bearings?

Cartridges require no special pre-amp. If your amp has one built in the sound from the deck will come out at the same level as other functions. If the amp has no inbuilt pre-amp you will still hear sound (if the cartridge is working) only the volume will be too low to listen to. All you need do is connect the record player to the amp and see if you can hear the sound. If you can't then you need a magnetic cartridge pre-amp. By the way if you need a new cartridge you don't have to stick with a Gemini make. You can use any one you want as long as it will fit into the headshell. There some better makes of cartridge out there, that will give better sound quality. It all depends on what you want to spend on a cartridge!

If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls. Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.

You could try this place http://www.trusound.co.uk/index.php?page_id=24

This is not an audiophile turntable. There is no provision for adjusting the vertical tracking angle. The closest you can come to making an adjustment is to place shims between the phono cartridge and the headshell.

Look at the cartridge make and model number fitted. Put that into Google and the type of stylus needed will show up.

Warning: All applications and personal files contained on the tablet will be erased. Only do this if you are unable to start your tablet.

1. First, ensure the tablet has been switched off.
2. Hold both the VOL+ and POWER buttons until the Gemini logo appears. Release both buttons.
3. You should see a green robot on the screen with a red warning sign.
4. Press & hold POWER then press VOL+ once, then release the POWER button. A menu will show on-screen.
5. Using the VOL+ and VOL- keys you can move up and down to select the Factory reset option. Press POWER to select this option, then move down to YES and press POWER again.
6. Once completed, press POWER to restart the unit.

Check this link to download the manual. http://tv.manualsonline.com/support/other/universal-remote/universal-remote-control-manuel-4820313

hello.......Accurian vcr/dvd its a Radio shack product you can probably d/load manual..[2]gaint remote go to amazon its a Amer-Tac -zenith $12...i'm on amazon.... just hit Bose remote [email protected]

275,270,271. Try these codes. If you wish to get more information, check these links. Setup procedure, and setup code list to many popular remote controls are given.Pull up older posts. http://electro-medical.blogspot.com/ http://electrohelponline.blogspot.com/