GE Medical - Answered Questions & Fixed Issues
Interpretation is missing on GE Mac 1200
If your GE Mac 1200 ECG machine is not printing the interpretation, even though the interpretation option is marked as "Y," there may be a problem with the printer, the cables, or the settings.
To troubleshoot this issue, you can try the following steps:
- Check the printer to ensure it is turned on and properly connected to the ECG machine. Make sure the cables are securely plugged in and not damaged.
- Check the printer settings to ensure the interpretation option is enabled. You can do this by pressing the "Setup" button on the ECG machine and navigating to the "Printer" menu.
- If the printer settings are correct, try resetting the ECG machine by turning it off and then back on again. This may clear any temporary glitches or errors that are preventing the interpretation from printing.
- If the problem persists, you may need to contact GE customer support for assistance. They will be able to provide you with more detailed troubleshooting steps and help you resolve the issue.
12/10/2022 5:09:43 AM •
GE Medical
•
Answered
on Dec 10, 2022
•
54 views
GE mac 1200 printer rolls opposite direction. why?
If your power line has a two female connection, try unplugging and turning it over ( so the connections are the opposite way around ) plug it back in and try it again, sometimes the current will only flow one way and if it's wrongly connected it will cause the motor to run in reverse.
Jayel.
4/10/2017 8:32:29 AM •
GE Medical
•
Answered
on Apr 10, 2017
•
1,667 views
I have EKG machine GE
Our EKG machines at work have specific paper that will only work with them, are you using the same type as before? Also, it is possible to put the paper in upside down and it will not print on that side. Have you tried to turn the paper around? Good luck
11/15/2011 10:57:17 PM •
GE Medical
•
Answered
on Nov 15, 2011
•
521 views
Simultaniusly on and off
hi,
You have to check the battery of you monitor . If the battery is short then this problem can occur.
ok
9/24/2011 5:27:07 PM •
GE Marquette...
•
Answered
on Sep 24, 2011
•
318 views
The feeding paper goes 2
You need to consult the manual, there are multiple printout formats on this machine and it appears that it is looking for data for a print out formation and when it finds none, it skips and then prints again.
7/5/2011 1:39:19 PM •
GE Medical
•
Answered
on Jul 05, 2011
•
232 views
I need the service password to reset the unit to
hi,
remove the AC power. then remove the battery from the machine. reinsall the battery after 15 minutes. then power on. it will be at factory settings. if u need its service manual pls contact me through fixya . for removing battery watch the pictures bellow.
ok
1/11/2011 8:09:18 AM •
GE Marquette...
•
Answered
on Jan 11, 2011
•
475 views
Not finding what you are looking for?