Garrity Camping, Backpacking & Hiking - Recent Questions, Troubleshooting & Support
How do i change bulb in garrity led light
Had a look on their web site and couldnt find that torch in their product lists. Basically with all LED lights the LED is soldered onto a small circuit board and is not generally replaceable unless you are into electronics and can solder in a new led.
How to replace bulb in garrity stainless steel pen light
I have a Garrity stainless steel flashlight that is approximately 6 inches long. It uses two AA batteries. The light is turned on and off using a push button on the back (push on, push off). The head-end turns to "focus" the light. The lamp, itself, is incandescent. It is 9/16-inch long, including the two 1/4-inch wire leads. The flashlight was purchased 11 years ago, and the lamp just burned out. When I called Garrity, they said they no longer had replacement parts for these flashlights. Which is strange, given you can use Part 2A001 Mineature Bulb G1.27 Base bulbs available from Bulb Town in Jacksonville, FL, as replacements. They work like a champ! If you have any questions, ask to speak to Melinda.
6/28/2017 10:05:45 PM •
Garrity...
•
Answered
on Jun 28, 2017
I have a Garrity Industries
The notched end of the unit is the lid of the battery cover. It might be cross-threaded.
Immerse that end in hot water and then twist holding with a dry towel.
Hopefully that should open it.
Not finding what you are looking for?