Fuji Popular Questions, Answers, Tips & Manuals

I had a Finepix camera and on it was a feature for image stabilising. On the display it showed a hand. Have a look for it on the menu

Can you just pull out the memory card and using a memory card reader input the data into the PC?

A camera is for recording images onto film, not reading the film.

Format the card in the camera

Make sure Lock Unlock button on memory card is in UNLOCK position. Sometimes sliding the card into computer slot moves the button. Be careful to put it in straight.

Try putting the memory card in a USB card reader attached to your computer, which should see it as another drive. Write-protect the card first.

armanhotarman

There is something preventing its free movement. This is not user fixable. Take it for a service.

What error message are you getting ?

What did you do or what changes did you make to your computer since all operated fine? Bad things just do not happen - you must have done something that is now responsible for the issue. Can you repair your Vista installation - your OS may be at issue. If you have other computer with Vista try installing there to see if it works. Maybe something is now wrong with the camera - it happens.

-Check battery. You might put in in reverse or (opposite) Good luck and enjoy take picture. Mai

The model is printed on the frame. If repainted the serial number will not likely help you, and the bike value is minimal. For more info see my tip: How to determine the year value etc of your bicycle I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Set shake reduction, if your camera has it, or else use a tripod or other support. Increase ISO so you can use a faster shutter speed and smaller aperture, for greater depth of field. Use manual focus if you can - night scenes often confuse autofocus. Finally, be prepared for a high failure rate !

You need to manually set ISO to a lower value

Check card to see if you have reached maximum saturation. If so you may have to start dumping files or backing up elsewhere to make space for more images.

That is because it is broken - take it for service or repair

Probably nothing. You must have set something in the menu system for this to happen - try looking in the manual.

Head cleaner ?

I doubt the battery cover being off would stop it from working.

I'm sorry, but it is not possible for you to transfer your photos to my computer, as you seem to imagine. Are you sure you have contacted the correct site for this query ?