The battery door is stuck on my fuji finepix S. How do I open it?
Check the basics first. Some of these suggestions may sound silly but I have done stuff like this.
Have you got something screwed to the tripod mount? This can overlap the door and stop it opening.
Have you dropped or bashed the camera recently?
Are you moving the door slide release in the correct direction? Check there is no damage visible on the camera or if there's anything trapped round the edge of the door jamming it?
Using a gentle but firm pressure with you thumb, press the door down into the 'closed' position. (I find sitting with the camera in my lap works best for this). Then use the slide release on the door. Release the pressure to see if the door has opened. You might need to roll your thumb round in flat circles to feel if the door is tight or slack when closed.
If this doesn't work or you have found some damage I would recommend you take it to a camera specialist as they will have the correct tools and skills to sort it out.
11/19/2018 11:10:57 PM •
Fuji Cameras
•
Answered
on Nov 19, 2018
I have a Fuji FinePix
I had a Finepix camera and on it was a feature for image stabilising. On the display it showed a hand. Have a look for it on the menu
How to do a hard reset
Remove the battery for 20 mins. then replace the battery, then go to the camera's menu and set the Date & Time.
Zoom error on fuji finepix A500 digital camera
Hello
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the
probability is that you will have to get it fixed by a professional.
Use
these at own risk as it may further damage the camera.
Firstly ,
try connecting your ac adapter or usb cable.
Try holding the
shutter button while switching on the camera.
Look at the lens ,
and if some of the lens 'circles' is misaligned or not concentric then
try wiggling it (while holding camera lens down).
Try gently
pushing or pulling the lens when it extends but this is risky as it may
cause the lens barrel to slip out of its guidance system.
Another
way to do this is to place the camera lens down on a hard surface and
then power it up. Be sure to use a soft cloth or something similar as to
not scratch your lens or casing. Let the lens push the camera up and
down a few times and sometimes the little resistance provided by the
camera is enough to get things going again.
Try hitting your
camera near the lens on the body with the soft tissue on the palm of
your hand.
Other than that , I would take the camera to a repair
center for a evaluation to see if it would cost more to repair than to
replace the camera.
If it is still under warranty I would suggest
you take it in before trying any of these steps and remove any
off-brand batteries or accessories as some stores are really fussy about
warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
Hope
the advise is useful. please do not hesitate to let me know if you need
any further assistance. Also, please be so kind to let me know if you
found this helpful.
Regards
Andrea
Fuji Micro Generator FJ6200Ri.
What is starter Battery Voltage?
At present, the gasoline engine does not have 24 V, diesel engine has 12 V. The ignition of gasoline engines is different from that of diesel engines. Gasoline engines use spark plugs to ignite combustible mixture air to explode for work, so they do not need high speed. A low-power starter does not have to use 24V
starter battery, while a diesel engine needs a high speed to do its work through a high-pressure spontaneous combustion explosion, such as the excessive volume of a 12V high-power motor. Therefore, the low temperature starting performance of 24V.12V diesel engine is generally used in low power diesel engine, and the application of deceleration starter solves this shortcoming.
Not finding what you are looking for?