Frigidaire Logo

Frigidaire Popular Questions, Answers, Tips & Manuals

  • 3K Products
  • 135K Answers

There are screens under front of top just above door. Remove those and top should lift up and remove

Frigidaire... | 75 views | 0 helpful votes

press clock button set time with number pad then press time(clock) button again

Frigidaire... | 1,549 views | 0 helpful votes

It should be labeled as such in control panel around timer.

Frigidaire... | 43 views | 0 helpful votes

Frigidaire Affinity Washer Error Code E41 = Control board thinks the door switch is open. Usually replacing the door switch fixes and clears the error code.

Frigidaire... | 96 views | 0 helpful votes


Bad Electric Cooktop Dual Element Switch

Our Frigidaire Gallery electric cooktop dual burner would not work when either the single or double mode was selected. I did not have the electrical schematic available to use for troubleshooting the switch and initially was not certain if the switch or heating element was bad.

In thinking about the situation, I deduced that the problem was most likely the switch being bad as it was highly unlikely that both elements of the dual element burner would be bad at the same time. I ordered a new switch, received it a few days later, and replaced it in about 25 minutes. Upon turning power to the cooktop on and trying the new switch, both elements of the burner worked as expected.

on Jan 04, 2019 | Frigidaire Cooktops

The only thing a customer can check is that the condenser coils are free of dust and that the condenser fan is turning. For everything else you need an engineer to diagnose and fix.

Your fridge is set a bit cold at 33'F which is only 1 degree over freezing. The internal temperature should be read with a fast acting digital thermometer left in the fridge for 5 minutes. 35'F is the optimum. 0'F for your freezer is correct.

Frigidaire... | 375 views | 0 helpful votes

I can't answer that but cut all power to the freeser

Frigidaire... | 270 views | 0 helpful votes

On our machine the door latch seems temperamental and we have to push the door closed quite hard. It will then start.

Frigidaire... | 105 views | 0 helpful votes

The communication between the oven user interface and the touch panel cannot be initiated.

Frigidaire Ovens | 68 views | 0 helpful votes

Maybe ice maker going through it’s Cycle is the noise you hear. Is it cooling properly?

Frigidaire... | 63 views | 0 helpful votes

Request the wiring diagram directly from Frigidaire.

Frigidaire Ovens | 46 views | 0 helpful votes

Do not use the self clean, it gets the oven way too hot and the oven won't work while it is cleaning. On our oven we put a piece of black electrical tape over the self clean button and told everyone in the household to not use it ever.

Frigidaire... | 48 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Frigidaire Experts


Level 3 Expert

84516 Answers

Brad Brown

Level 3 Expert

18023 Answers

Cindy Wells

Level 3 Expert

5827 Answers

Are you a Frigidaire Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides