Frigidaire Logo

Frigidaire Popular Questions, Answers, Tips & Manuals

  • 3K Products
  • 135K Answers
  • 3M Views

Check the owners manual or manufacturers website for error codes. Most likely cause...a bad control board.You tube will most likely have "how to replace" videos for your assistance.
Good luck...

Frigidaire... | 1,522 views | 0 helpful votes


If you have a Frigidaire refrigerator with an icemaker, you may notice that water leaks from the icemaker from time to time. There are several reasons why this occurs, ranging from simple fixes to ones that are more complex. Once you notice leaking water, running through a quick checklist determines the problem, so that you can fix it.
Plastic Tubing Water Supply ConnectionsNo matter the type connection material used, it must be tight and secure so that no water leaks out. Check every place where a pipe connects to the appliance. Make sure the connection is tight and that there are no leaks. Ensure that the water supply valve is turned on completely. As you check each connection, watch that there are no drips. Tighten them if you catch any possible issue, as this could solve your problem.Clogged Condensation DrainWater can appear leaking from the icemaker when it is actually caused by a clogged condensation drain. The automatic defrost system occasionally turns on, melting any frost from the cooling coils. The resulting water falls into a drain sending it to a pan to evaporate. However, if ice from the icemaker makes it into this drain, it can clog it, and the water accumulates in either the fresh-food compartment or the bottom of the freezer in a side-by-side model. In a side-by-side with an icemaker, the water appears to be coming from the icemaker. Check the drain and clear it if there is a clog.

Ice Maker ValveIn Frigidaire models with an icemaker, a valve regulates the amount of water in the icemaker. If this valve malfunctions, a leak can result. The valve directs the water into cube molds. When obstructed by mineral deposits, the water sprays out of the molds. The water drips down and pools at the bottom of the freezer and onto the floor outside of the unit. Cleaning out the screen located at the end of the valve solves this problem.

Frigidaire... | 37 views | 0 helpful votes


It sounds like a dead short somewhere in your wiring. If you've had someone replace a breaker recently they could have used the incorrect amperage size.

Frigidaire... | 127 views | 0 helpful votes


try by passing the thermostat if it goes replace it

Frigidaire... | 75 views | 1 helpful votes


The error code E90 is just a group error code. It is indicating a communication error between the two boards in your machine. It does not indicate where the problem may be. A power glitch may have caused the E90 error code or a loose connection.
https://www.appliancepartspros.com/answers-for-frigidaire-control-electrical-137006000-ap4358809-question-70945.html

Frigidaire... | 55 views | 0 helpful votes


Many reasons why it may be loosing temperature. Such as Defrost problem, fan not running, sealed system problem, compressor problem

Frigidaire... | 142 views | 0 helpful votes


Hi there, I am not sure what your asking. There are NO user serviceable parts inside the unit- and it sound like your temperature sensor failed or another part related to the sensor or thermostat- also the temperature controller could be damaged- is it out of control in the freezer and fridge? There is not much you can do beside call for help if you have already reset it. good luck

Frigidaire... | 46 views | 0 helpful votes


There is probably an object Some paper or mouse ( I have seen that one) coming into contact with the fan fins.

Frigidaire... | 36 views | 0 helpful votes


PRESS CLOCK THE USE UP/DOWN BUTTONS TO SET TIME THEN PRESS TIME AGAIN

Frigidaire Ovens | 114 views | 0 helpful votes


This may occur due to faulty breaker check by replacing,if the problem is due microwave than it can not be intermittent.

Frigidaire... | 46 views | 0 helpful votes


Pretty sure you will need the motor since that is where the bearing is located. Get the part # off the motor and search by that.

Frigidaire... | 37 views | 0 helpful votes


check the cold water solenoid is allowing water into the machine,this can happen even when the machine is not in use

Frigidaire... | 34 views | 1 helpful votes


Replace the hose that’s leaking

Frigidaire... | 95 views | 0 helpful votes


if you have knowledge of how to do this type of thing you sure can, providing the connection is the problem- it very well might not be.
good luck
https://www.6ya.com/mrmmike

Frigidaire... | 32 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Frigidaire Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Brad Brown

Level 3 Expert

18002 Answers

Cindy Wells

Level 3 Expert

5793 Answers

Are you a Frigidaire Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...