Frigidaire Dishwashers - Page 7 - Popular Questions, Answers, Tips & Manuals
My dishwasher FDB2510LCC1 get a cl code while washing and stays running on the wash stage until it is shut off
Hello Randy, thank you for your inquiry!
From the information you have provided your Frigidaire dishwasher is displaying an error code of "CL" this means close door. The dishwasher may not be sensing that the door switch is closed. The "CL" means that you could have a possible issue with the main control board or door latch. I would recommend checking to make sure the latch does not have any visible damage. This could also be a miscommunication within your dishwasher and a reset may help clear it out. In order to reset the dishwasher you would flip the household circuit breaker off for at least ten minutes. We hope this information is helpful to you. -Matt
1/28/2016 2:20:21 AM •
Frigidaire...
•
596 views • 0 helpful votes
Burnt plastic smell (per tenent) during dry cycle. I saw no melted parts on heating coil. Where to look next?
Hello Jon, thank you for your post!
Based off what you have described the Frigidaire dishwasher is giving off a burnt smell. You may need to check under the dishwasher to verify all the components are in proper working order. The element may have touched the tub or spray arm and this may have caused the smell. I would suggest having a professional technician out to your home for proper diagnosis and repair. Hopefully this information is helpful to you. -Matt
2/16/2016 3:03:14 PM •
Frigidaire...
•
260 views • 0 helpful votes
Model LGBD2435NBOA, S/N TH22844675. Is there a recall?
talk with the service agent for the machine as he will know if there is a recall open or a modification for the problem or contact the help line direct to the manufacturer, explain what has happened and ask for a warranty fix as it may be a design fault
2/12/2016 1:55:36 AM •
Frigidaire...
•
187 views • 0 helpful votes
I cannot find the model number but need to know where reset button is?
Hello E Holliday, I appreciate your post!
I see that you need to find the model number for your Frigidaire dishwasher and a location of the reset button. There is not a specific reset button on your dishwasher. The best way to reset it is to disconnect power from it for at least ten minutes. You can locate the model number on the inside left hand wall of your dishwasher. I hope this information is helpful to you. -Matt
12/28/2015 5:42:33 PM •
Frigidaire...
•
546 views • 0 helpful votes
Motor will not shut off
Hey Cathy, thank you for your post!
I see that the motor on your Frigidaire dishwasher is not shutting off and it appears the cycle did not run. I would recommend performing a reset on your dishwasher and you can do that by disconnecting the power from it for at least ten minutes. You could be having a possible issue with your control panel, sensor, or motor.
If the reset does not help correct the issue you are having with your dishwasher you may need to seek additional help from a professional technician. You can contact your manufacturer for information on a local technician. Hopefully this information is helpful in some degree. -Matt
3/15/2016 9:40:55 PM •
Frigidaire...
•
53 views • 1 helpful votes
How can I replace main control module?
Hello John, thank you for your inquiry!
Based off the information you have provided you need help replacing the main control on your Frigidaire dishwasher, FGHD2433KB. I have located your parts manual which provides a breakdown of all the available parts within your dishwasher. If you still need additional help I would recommend contacting a professional technician for further assistance. This will avoid any improper disassembly or personal harm. I hope that this information is helpful. -Matt
ftp://ftp.electrolux-na.com/ProdInfo_PDF/Kinston/5995551149.pdf
2/23/2016 8:26:02 PM •
Frigidaire...
•
57 views • 1 helpful votes
Frigidaire dishwasher stops in mid cycle
two things to look at : water level sensor ? seems I once had a machine that the water inlet valve never totally shut off and it overfilled basin this shut machine off on a spill sensor fault but took several minutes to do this , Also the door closed switch , seems they do get finicky as time goes on and even thought door stays closed the movement of machine opens the door switch up (not the door) this also takes several minutes to occur
9/2/2015 3:45:52 PM •
Frigidaire...
•
6,937 views • 0 helpful votes
Door latch hard to latch
Hello friend, thank you for your post!
I notice that your door is hard to latch on the Frigidaire dishwasher. You may need to check the latch to assure that it is not damaged or dirty. Any soap residue build up can cause a latch to become difficult to operate. It could also be a possible issue with a misalignment of the door. Check the hinges and the springs to assure that the door is aligned properly. I hope this information is helpful to you. -Matt
12/30/2015 6:42:52 PM •
Frigidaire...
•
162 views • 0 helpful votes
Fixing a Frigidaire Dishwasher (FMB33ORGCO)
Hello Paulus!
From what you have described your Frigidaire dishwasher is will not start and you have performed a reset. This could be a possible issue within your control panel or wiring harness. Since it could be an issue within the electric components I would suggest you speak with a professional technician, they would have the appropriate tools needed for proper disassembly of your dishwasher. Hopefully this is helpful. -Matt
Dishwasher has water in the bottom
check and be sure you don't have something stuck in the water pump for the drain or else the pump maybe bad and needs replacement. In addition, be sure the pump belt or motor is driving the pump.
12/26/2015 5:18:01 PM •
Frigidaire...
•
96 views • 0 helpful votes
Not finding what you are looking for?