Franklin BIB-475D databook password reset?
Unfortunately, without the password, it may not be possible to access the Franklin BIB-475D databook. There is no official way to reset the password if it has been forgotten.
However, you may try a factory reset of the device. To do so, locate the reset button (usually located on the back of the device) and press and hold it for a few seconds until the device restarts. Note that a factory reset will erase all data and settings on the device, so be sure to back up any important information before proceeding.
If a factory reset does not work or if the reset button is not available, you may need to contact Franklin support for further assistance.
2/28/2023 6:13:04 AM •
Franklin...
•
24 views • 0 helpful votes
How to change franklin chef vertisserie motor
To change the motor on a Franklin Chef Vertisserie, you will need to follow these steps:
- Unplug the Vertisserie from the wall outlet and remove any food or cooking utensils from the appliance.
- Remove the outer casing of the Vertisserie by removing the screws that hold it in place. You may need to use a screwdriver to do this.
- Locate the motor inside the Vertisserie. It should be located near the bottom of the appliance.
- Disconnect the electrical wires that are connected to the motor. It is important to note the positions of these wires, as they will need to be reattached in the same positions when you install the new motor.
- Remove the mounting screws that hold the motor in place.
- Carefully lift the motor out of the Vertisserie.
- Install the new motor by reversing the steps above. Make sure that the electrical wires are properly connected and the motor is securely mounted in place.
- Replace the outer casing of the Vertisserie and secure it in place with the screws.
- Plug the Vertisserie back in and test the motor to make sure it is functioning correctly.
Not finding what you are looking for?