Plz how apply code
What code are you trying to apply and on what equipment?
please repost with more details
Admin password not working
I've never seen a TV Receiver or DVR with an admin password.
if this is a router or wireless router and you've forgoten your password, you could try setting it to factory defaults and setting up from scratch again.
not recommended if you have any special settings like port forwarding or anything in its brain
Please give me more info!
The sound ok but no video
What kind of TV? Did it ever work? What channel does it show? How is the Fortec connected to the TV?
I need to install my satellite
What is your back ground. Have you ever done this. What is your location in the world? Do you have a clear line of site to the sky at about a 30 degree angle? What cable do you have. Is it run to the house? Is this a new or a used system?
Ive put dish up but theres no signal ive lighned
May not be the correct alignment. Each company has its own directions and azimuth.. So what I suggest is calling the Company, and getting the azimuth which is degree and also get the tilt or angle. If you have a compass this will help once you get this information. If not sometimes you can have 1 person inside with the tv on andon person outside trying to click it in one notch at a time.. Those are your best options at this point.. cheers and hope this helps you out
I can not get menu. I get an unstable
hi
you should replace or repair your power supply board; when you hear this kind of sound there is some chimical capacitor damadged on the power supply unit,
i hope that help;
Not finding what you are looking for?