Fisher Price Toys - Page 4 - Recent Questions, Troubleshooting & Support
Puppy kyn library not registered?
I had this same problem, i think at has something to do with windows 7, but you can change it to run in xpxp compatibility mode.
1) right click the icon for puppy grows,
2) go to properties
3) click compatibility tab
4) click/check box saying(run this programme in compatibilty mode for xp)
5) Open puppy grows icon and it should now work
Hope this helps
Grimmster
I need to reassemble a 1974 Fisher-Price toy cash register
Fisher Price cash registerI am assuming that you have removed the base to unjam the drawer, and a brown plastic lever fell out of the white assembly inside and you can't work out how to put it all back so it works. It took me three days to figure it out.On the inside of the base is a long coiled spring. First hook this back over the end of the central drawer runner. Have a ruler or similar flat item handy to release it later.Take the body of the cash register and insert the narrow end of the brown plastic lever through the white plastic assembly, until it engages with the handle mechanism. You will then feel resistance when turning the handle. There is a flat metal strip in the middle of the assembly. On the side of the brown lever is a small projecting peg. Put this behind the metal strip. Put the thicker end of the lever through the rectangular gap in the white assembly.Place the drawer into the body of the cash register so that the back of it engages with the V shaped notch on the plastic lever.Hold the drawer and body together with one hand and carefully lower them on to the base. While there is still a small gap under the drawer, insert the ruler to release the coiled spring. This will engage with the projection under the drawer.Push everything together and replace the screws. Job done!
PARTS FOR POWER WHEELS EXTREME MACHINE
Power Wheels only makes the battery connector available as part of the whole wiring harness. There are several parts that Power Wheels will not sell directly to consumers, these usually include the wiring harness, motor/gearboxes and the switches.
If you do need the motors, battery & wiring harness it is most likely not worth repairing. That being said the Xtreme Machine is no longer made by Power Wheels, and the closest thing would be the Dune Racer they now produce. So if you are really wanting the machine repaired you will have to take it to a Authroized Power Wheels service center and have them repair it for you.
The battery you can purchase usually off of Amazon, Toys R Us or from one of the many service centers like us. Power Wheels put two different style batteries into those vehicles depending on the year made. So it may either have 2 6V Red batteries or it might have 1 12V Gray battery. Here is a link to the batteries on our site:
Genuine Power Wheels Replacement 12 Volt 6 Volt Batteries
As for the motors & the wiring harness you would need to contact you local service center. Here is a link to the service center locator:
Mattel and Fisher Price Consumer Relations Support Center Power Wheels...
Also before you get too far into this project be sure to look at the new vehicles they make that are very similiar:
Power Wheels Products
Hello, I am trying to
Hello,
We just had the same problem in our nearly 10 yr old popper.
We opened it up and the black "stick" had broken in two pieces.
We cut a section of wire coat hanger to the exact length to replace the "stick". The new coat hanger goes through the tear drop shaped hole in the yellow plate (the popping part). It sits loosely in the white guides. It sort of seems like it will fall out but doesn't once you have it back together.
Hope that helps
Not finding what you are looking for?