Air Bocahttps://www.airboca.com > what-to-do-if-your-ac-has-...
Nov 14, 2022 - Additionally, a common cause of blown fuses (and trips to the AC ... on the fuse, you can inspect the access panel of your air conditioner.
"); background-repeat: repeat-x; display: inline-block; overflow: hidden; position: relative; background-size: 14px 11.4px; height: 11.4px; width: 68px;">"); background-repeat: repeat-x; display: block; background-size: 14px 11.4px; height: 11.4px; width: 62px;"> Rating: 4.7 · 285 votes
Missing: Fedders A6Q10F2A
Stack Exchangehttps://diy.stackexchange.com > questions > why-does...
Sep 7, 2013 - Which fuse is blowing? There are 4 common locations for fuses: main fuse panel for air handler, main fuse panel for condenser, local disconnect ...
6 answers · 1 vote: Long-term darkening of a fuse on a high-draw circuit like an AC is not unusual. How
very limited information generic answer look on the covers of the unit for your c line connection and check if your thermostat wires were connected if all are then you have a c line but not connected on stat if not connection at units then run a line to the stat
How do I tell the age of a Fedders furnace or air conditioner from the serial number?
Although the Fedders brand is used for window units nowadays, this encoding only applies to when they manufactured unitary (split) systems years ago. The second letter of the serial number indicates the year of manufacture (from 1966 to 1977):
A = 1966 B = 1967 C = 1968
D = 1969 E = 1970 F = 1971
G = 1972 H = 1973 I = (not used)
J = 1974 K = 1975 L = 1976 M = 1977
An ancient Fedders unit we recently inspected had the serial number AH11877, indicating that it was manufactured in 1973. The home was built in 1973, which provided a secondary verification of the manufacture date indicated by the serial number
https://www.manualslib.com/brand/fedders/air-conditioner.html
Usually the front is held on with screws on the sides of the unit. I would check behind the filter screen trim plate as well. I would be surprised if the front is just snap locked on.
You need to know why it's there. I'm guessing one put it there because of a reason, (no common outside, only one good wire, no 24 to power a board, SOMETHING). What and exactly where is it hooked up?
Do you have power to the unit? Pull the unit and start checking for power only if you are comfortable with a live circuit. Start checking with switch to turn on unit. Be careful you didn't tell me if this is 115v or 230v which can zap and kill you.
I'm sorry to have to tell you this, but the F2 error is two times worse than the F1 error... (kidding) Seriously, you should note the model and serial numbers on the unit and report it to Fedders customer service department - that way you will know if the local boys are giving you the straight scoop and not taking advantage of you by jacking up the price. Find out what the manufacturer has to say before you hand over that unit to the service man.
