Exide Computers & Internet - Recent Questions, Troubleshooting & Support

it does not matter, just replace it , most are bad in short time. 1 to 3 years, die. (longer of floated right and never stressed) they die based on heat located and how many times you run on inverter power, and how long. (stress) UPS or? what matter is inside depends on the UPS history. looking first is what matters. why not read the name on the battery, EXIDE? , and call them and ask, many makers of any DEVICE use encoded date codes. that only they know, as they invented the code, their lil secret. why post lacking battery makers name and P/n# my guess is it does have Exide 10:03:43 might be 2010 made in work week 43. but is wild useless guess but lots of experience in date codes. Julian, anti-Julian data, and more. wiki it. my last company , (huge) used 10 months in a year, , yup!

There is no schematic that I can find. It's only a charger so simple electronics inside, should be simple to fix. If it is faulty.

(Inside or out) ? tell the problem first, the ask a question so the helper can be on the same page as you see? there is a story , please tell it, clearly. why not ask Exide this, at there web site, I bet you there is non, no service manual worth salt. but IDK, most times, in my life, I made my own. most are simple devices. google find this (parts) https://www.centurytool.net/70_100_Exide_Battery_Charger_Parts_List_s/245.htm this Device is very simple it has a huge transformer a rectifier bank(diodes ) to DC and current regulator DC and timer. and meter and 2 power cables. one of those is bad. if you had voltmeter you can diagnose it, first check for RAW DC power at the diode bank, if dead/weak work backwards of good go forward, like that. easy for sure,if you know how power-supplies work;

a big capacitor in parallel with inverter https://passive-components.eu/selecting-film-or-electrolytic-capacitors-for-power-conversion-circuits/

https://www.exide.com/en/documents-resources?search=Exide+g1-12-775b+&type=All Please, use the above link to contact the manufacturer. The requested model installation manual is not online. The correct jumper settings on the transformer may vary by model. An incorrect setting could damage the equipment. The contact information on the website may be helpful.

2B02 stands for factory No.2 of ExideB stands for FEB.month like A-Jan,B-Feb,C-March.....0 year 2010, eg: 1: 2011,2 : 2012, 9: 2009

You need to post more information as to what the exact problem is.
If it is just how to turn on, you can download a manual from the Powerware site.
To turn the UPS on, press the middle button on long enough for the UPS to come on.
It will display that it is coming on, then will do abattery self test.

Check the state of charge with a voltmeter and you should discover it is supplied with a substantial charge, due to the fact a discharged battery is soon permanently damaged. Batteries held in stock should be periodically recharged to maintain peak capacity. Most new batteries can be put into service immediately with no charging but it is best practice to give a new battery a brief charge of around a couple of hours prior to fitting.

On all new batteries there should be a label listing when it was manufactured etc. however there is more commonly a bar code, which you can interpret from here http://www.indpwrbattery.com/Pages/datecode.aspx hope this helps. If there is no label, chances are it has fallen off over time. Date Code