Exceed-RC Toys - Recent Questions, Troubleshooting & Support

you have a defaulty toy from company its not your fault its the companys fault who built that toy.

There is a switch on the transmitter that says ST (Steering) and has two positions- N (normal) and R (reversed). There is also a TH (throttle) which can also be Normal or Reversed. Try switching that setting.

your ESC (speed controller needs resetting

20% nitro

What sort of battery are you using ? if it is the original stock battery which is Nimh 8.4v, it is possible that this has formed a memory and is failing . change to Lipo 11.1v 2s 2000Mah or above and you should see a significant change in performance

Think more than likely you have burnt out the speed controller as this is the first to go before the motor

I think it is 2 1/2 turns for both needles. This is 2 1/2 turns out from all the way screwed in

FAQ - Answers for Common Redcat RC Questions

www.redcatracing.com/FAQ

Q. I installed batteries in my car and in the remote control but when I turn on the power ... You may have some things such as throttle working but no steering. ... If it doesn"t your cord may have come off track and you can simply open the rear of ...

Why is my remote control not working? - Geardup RC Ford ...

https://www.ifixit.com/.../Why+is+my+remote+control+not+workin...

iFixitFeb 19, 2015 - To fix this, you can replace the batteries. ... The GEAR'D UP RC Ford Mustang GT is a remote controlled car released ... Is this a good question? Troubleshooting an RC That Won't Run - Radio Controlled ...rcvehicles.about.com > ... > Troubleshooting, Repair, and MaintenanceRadio Controlled Vehicles Expert. Share ... The batteries are often at the root of manyRC problems. ... Loose or broken wires can result in a host of problems.Radio Control FAQ ' RC Toys ' New Bright

could be esc or motor it self

faulity wiring in the plug?

i think u can go to youtube and type ur cars name an right usermanual

so when my back wheels start spining then in like 2 seconds my front ones start and it makes a weird sound

4444

you only turn it a 1/4th turn at a time

clean the one way bearing in the pull start....have to take pull start off and clean the bearing inside the recoil...