ESQ Watches - Popular Questions, Answers, Tips & Manuals

https://www.youtube.com/watch?v=GuSiLhiCLDE https://www.youtube.com/watch?v=2QWt9pgsfA4 https://www.youtube.com/watch?v=TEcP0ZSnVmw

Here where we live we have a store that replaces watch batteries. I took mine in and he took the back off and took the old battery out and went to his battery stock and replaced it for me. He did all the work and only charged me three dollars. He has batteries for all makes.

Sorry we have no information on parts nor do we sell parts.

go to a jeweler or watch maker as they often have spare links from bands they adjust in shop when making a sale take the watch in to match the links

you need to go to a jewelry place, or walmart, you need a special tool called linkage removal tool. it has one job and only one job and thats all it does removes pins and reinstalls pins it is a very small press, the shaft of the press is about 1/64 inch

go to this link http://m.movado.com/media/manuals/pdfs/esq/ESQ_13_022_online_manual_rev.pdf

unscrew first then pull out

Go to Chase-Durer.com and download the operation manual for the Fighter Chronograph. It also has the two LED displays and same functions.

1. set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync mode.step 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

Any watch repair shop will fit new crystal and give real time estimate.

The best shot you have at finding out what this watch is, would be to take it into a Watch Repair Shop. They have books that identify watches by the make and mode, and I have found information on a lot of rare watches that way. Take the watch in, and they can probably identify it and give you an estimate as to it's value.
Good luck, and hope this helps.

You need to buy some watch maker tools to get that back off as it is friction fitted and is difficult to remove as try to lever it off . If you do not intend to remove it or other watch backs for battery replacements, then the best solution is to take it to a Jeweler as he/she will have the proper tools to remove it and a battery replacement for about ten bucks. failing to do that look at the following site for the tools. http://www.harborfreight.com/catalogsearch/result?category=General+Merch&q=watch+repair+kit

set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

Need instruction on how to open clasp on Oceania esq watch?

1. set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

Hi if the hands are running backwards then this would suggest the battery is in the wrong way round, take the battery out and turn it round and you should find it will be working normally.

some cheap batteries have got the terminals the wrong way round so the possitive will be the negative and visa versa so try and avoid buying cheap batteries as they wont last long and could do more harm than good.

let me know if you need further assistance ok

plz rate this solution as i have a whole page of unrated posts, thanks

Thank you for contacting FixYa.
The best place you can contact for replacement would be Movado itself by following the following link:
http://service.movadogroup.com/care.cfm

or you can also try:
http://www.watchbands.com/category.aspx,,categoryID,,754

Best regards. Jewel

Why do you want to take the back cover off? I think for your model, you should lift the time adjuster to take the back cover off. If you are taking it out for the first time, it will be a bit tight. You may use thin edged blades or so for the same. Constant taking out of back cover can make the cover loose and then it may begin fall off quickly.

Thank you for contacting FixYa.
I would contact ESQ at the following link:

http://www.esqswiss.com/

Best regards. Jewel