Epson Recent Questions, Troubleshooting Help & Support

Epson SC-P607 - Error Code - Printcopy.info

https://printcopy.info > brand=Epson Code: 54H; Description: Sequence error. LD Roller reset error; Causes: • detection operation of ASF phase failure; Remedy: • ASF Assy • ASF Motor.

According to the rear panel of my 2200, it will accept 120VAC 50 ~ 60 HZ. Which means that outside of a proper plug adaptor, it should work fine. You need to adapt the epson power cable to whatever the French use. Be sure it is 110~120 VAC. Ran into some 220 in Italy

It is possible that your Epson WF-7820 is experiencing a paper jam or a misalignment of the paper cassette. If the paper cassette is not correctly inserted into the printer, the printer will display an error message that tells you to insert the cassette correctly. To resolve this issue, make sure the paper cassette is correctly inserted and that any paper jams are cleared. If the issue persists, try resetting the printer by unplugging it and then plugging it back in. If the error message still appears, contact Epson support for further assistance. Loading Paper in Cassette 1 (Upper Cassette) https://files.support.epson.com/docid/cpd3/cpd39348/Source/Printers/Source/Paper_Loading/Tasks/XP800/loading_paper_upper_xp800.htmlfaq-207896 ' SPT_C11CB58201 ' Epson WorkForce WF-7520 ... https://epson.com/faq/SPT_C11CB58201~faq-207896?faq_cat=faq-topFaqsWF-3820 Series User's Guide https://files.support.epson.com/docid/cpd5/cpd58812.pdf

There are different ways to reset an Epson ink cartridge depending on the model of your printer and the type of cartridge you are using. Here are some general steps that may work:

1. Turn on your Epson printer and wait for it to stop making any noise.
2. Open the printer cover and remove the ink cartridges.
3. Locate the small microchip on the side of the cartridge. This is the chip that stores the ink level information.
4. Use a cotton swab or soft cloth to clean the metal contacts on the chip. Make sure there is no ink or dirt on them.
5. Reinsert the cartridges into the printer and close the printer cover.
6. Turn on your printer and let it recognize the cartridges. This process may take a few minutes.
7. Check your printer status or ink level indicator to confirm that the cartridges have been reset.

Note that some Epson printers may not allow you to reset the ink cartridges, or the reset method may vary depending on the specific model or type of cartridge. If you're unsure about the process or have trouble resetting the cartridges, you can refer to the printer manual or contact Epson support for assistance

If your Epson Stylus SX435W is indicating that there is no paper even though there is paper loaded, there could be several reasons for this issue. Here are some steps you can try to troubleshoot the problem:

1. Check that the paper is loaded correctly: Ensure that the paper is loaded into the printer's paper tray or cassette correctly. Make sure that the paper is aligned properly and not too tightly or too loosely loaded. Also, make sure that the paper is not curled or wrinkled.
2. Check for paper jams: If the printer sounds like the wheels are turning to engage the paper but the paper doesn't move, there may be a paper jam. Carefully check for any paper jams, and remove any paper that may be causing the problem.
3. Clean the paper feed rollers: Over time, the paper feed rollers can get dirty or covered in debris, causing them to slip and not grab the paper properly. Use a lint-free cloth dampened with water to clean the rollers. Be sure to let them dry completely before attempting to print again.
4. Reset the printer: Sometimes resetting the printer can clear any errors or issues that are causing the "paper out" message. Turn off the printer, unplug it from the power source, wait for a few minutes, and then plug it back in and turn it on again.

If none of these steps solve the problem, you may need to contact Epson support or take your printer to a service center for further assistance.

The error message you are seeing on your EPSON EX30 projector indicates that there is an issue with the Auto Iris function of the projector. The Auto Iris is responsible for adjusting the brightness of the projected image based on the lighting conditions in the room. If there is an issue with the Auto Iris function, it can cause the projector to malfunction and display error messages. To resolve this issue, you may try the following steps:

1. Turn off the projector and unplug it from the power source.
2. Wait for a few minutes and then plug the projector back in.
3. Turn on the projector and try to use it again to see if the error message has been resolved.

If the error message still persists after trying the above steps, it is recommended to contact your nearest Epson service provider for further assistance. They may be able to diagnose the issue and provide a solution, which could involve repairing or replacing the projector's Auto Iris mechanism.

Is the paper positioned in the proper spot? Most scanners require the paper is positioned at the bottom left. It also sounds like it may be the settings in your scanner properties. If it is set to detect the paper size, it will often choose a smaller size. Go inside the scanner properties and manually select the size paper you are scanning or select "scan to fit".

this indicates that your printer is experiencing an issue with its fuser unit. The fuser unit is responsible for melting the toner onto the paper, and is a major component of the printer. To resolve this issue, you will need to replace the fuser unit. This can be done either by a professional or on your own, although it is recommended to seek help from a professional if you are inexperienced with printer repairs. Before replacing the fuser unit, you should also check the other components of the printer for any signs of wear or damage, such as loose connections or faulty wiring. Additionally, inspect the toner cartridge and any other consumables, as they can also be a source of the problem. Once the repair is complete, ensure to check the print quality and resolution of the printer to make sure that it is operating correctly.

The flashing green light on your Epson Stylus CX3600 printer is indicating an error with the ink system. The error message you mentioned, "not to press the ink button unless the green light is on and not flashing", is likely referring to the ink button that is located on the side of the printer and is used to reset the ink levels. To resolve the issue with the flashing green light, try the following steps:

1. Turn off the printer: Turn off the printer and disconnect it from the power source.
2. Clean the ink cartridges: Remove the ink cartridges from the printer and clean the contacts with a soft, damp cloth. Make sure not to touch the ink nozzles or the copper contacts.
3. Check for clogs: If the problem persists, check the ink cartridges for clogs and clean the print head.
4. Reinstall the ink cartridges: Reinstall the ink cartridges into the printer, making sure that they are properly seated.
5. Turn on the printer: Connect the printer to the power source and turn it on.
6. Check the green light: Observe the green light and make sure it is no longer flashing

When you are facing it. Open it and on the right hand side where Led lights located. Below it and inside are there is a dip switch cover that you should be able to remove. Hope this helps.

To reset the counter on an Epson CX4200, follow these steps:

1. Turn off the printer and unplug it from the power source.
2. Hold down the "Stop" button while plugging the printer back into the power source.
3. Release the "Stop" button after five seconds.
4. Press the "Stop" button three times.
5. Press the "Color" button and then the "Power" button to turn the printer back on.

These steps should reset the counter on the Epson CX4200. If the problem persists, you may need to consult your printer manual or contact Epson support for further assistance.

You have to replace the Waste ink pad and reset the weste ink pad counter.

epson L200 ink pads error Epson L200 is an All-In-One printer, All-In-One printer is a printer unit has multiple function as Scanning, Photocopying, and printing. Epson L200 comes with 6 ink bottle consist of 3 Black Ink, and colored ink, 1 bottle for Cyan, 1 bottle for Magenta, and 1 bottle for Yellow Colors pls check epson L200 ink pads error reset http://www.2012teamtech.com/epson-l200-ink-pads-error

Then your going to need to refill the tank, this is done with a refill kit, here is even a video showing you how to do it. If you need further help, I’m available over the phone at https://www.6ya.com/expert/chad_70dccdc9090b1a75

Buy a new ink pad. That's the part directly under the print head when the cartridge is parked. It's an absorbent pad that catches the ink when you clean the nozzles.

https://ccm.net/forum/affich-925545-epson-l220-ink-pad-is-at-the-end-of-its-service-life

Q: What should I do if my printer driver displays the message parts inside my printer are reaching their end of service life?

A: See the Epson Ink Pad Reset Utility page.
Epson Ink Pads Reset Utility

If your product is displaying an end of life service message, please view and complete the required information below to proceed.

Please explain the message I am getting in my printer driver that says parts inside my printer are reaching their end of service life.

Like so many other products, all Epson consumer ink jet products have a finite life span due to component wear during normal use. At some point, the product will reach a condition where either satisfactory print quality cannot be maintained or components have reached the end of their usable life. This is the normal product life cycle for highly mechanical devices like printers. This message is a warning that certain parts have reached the end of their usable life and that your printer will no longer work until it is serviced.

What parts are we talking about?

The message refers to the ink pads, which are actually a number of porous pads in the printer that collect, distribute, and very importantly contain the ink that is not used on printed pages. Ink is collected by these pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. Most users will not receive this message before the printer is replaced for other reasons. Some high volume users or those who use the printer for many years may receive this message about ink pads before other components reach the end of their usable life.

Why does my printer stop functioning when I get the message?

Epson is committed to ensuring the proper operation of all our devices to minimize the risks of property damage or personal injury during the lifespan of the product. The printers are designed to stop operating at the point where further use without replacing the ink pads could create risks of property damage from ink spills or safety issues related to excess ink contacting an electrical component
.
Is there anything I can do to continue using my printer?

Epson recommends replacing the printer, but if you want to continue using it, Epson recommends having the printer serviced at an Epson Customer Care Center. You may also be able to have the ink pads replaced by an independent service provider and use the Ink Pad Reset Utility to reset the Ink Pad Counter to continue using the printer. Please note that replacement of ink pads is relatively expensive and may not be a good investment for lower cost printers because the printers' other components also may be near the end of usable life. Epson does not recommend ink pad replacement by users without technical training or resetting the Ink Pad Counter without replacing the ink pads.


Note: This utility is for Windows XP and Vista operating systems only. We hope to develop an option for Mac users as well; however, we do not have an ETA or the OS requirement at this time.
To download this utility, please complete all fields below, select the agreement check-box and click Download. Required fields are noted with an asterisk(*). Some models may require you to be redirected to another website to finalize the process.


Go to this link to complete the agreement to recieve the Epson Ink Pad Reset Utility.
http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp

Trust this is helpful. :)

E101 error code ACULASER c9300

The Epson Artisan 835 waste pad is located in the printer's waste ink compartment and is designed to absorb any excess ink that is generated during the printing process. Over time, the waste pad can become saturated with ink, which can cause issues with the printer's performance. To clean or replace the waste pad on an Epson Artisan 835 printer, you will need to follow these steps:

1. Turn off the printer and unplug it from the power source.
2. Open the printer's cover and locate the waste ink compartment.
3. Carefully remove the waste pad from the compartment.
4. Clean the waste pad with a damp cloth, or replace it with a new one if it is heavily saturated with ink.
5. Reinstall the waste pad into the waste ink compartment.
6. Close the printer cover and plug the printer back in.

It's important to note that this process can be messy and you should use gloves and old clothes to avoid getting ink on your hands or clothes. Also, some printer models may have a different process to access the waste pad, you might need to consult the printer's manual or Epson website to know more about your specific model.

If your Epson C1100 printer is taking multiple sheets of paper when trying to print one page, it could be caused by a few different issues:

1. Check the paper tray: Make sure the paper tray is loaded correctly and the paper is not jammed or bent.
2. Check the paper guides: Make sure the paper guides in the tray are adjusted correctly and not too tight.
3. Check the pick-up roller: Make sure the pick-up roller is clean and not damaged. If it is dirty or worn, it may need to be replaced.
4. Check the solenoid: Make sure the solenoid is functioning correctly and that the spring is properly connected.
5. Check the gears: Make sure the gears inside the printer are functioning correctly and that they are not worn or damaged.
6. If none of the above steps work, it is possible that the printer has a more serious problem that requires professional service.

It is important to refer to the user manual or contact Epson technical support for further assistance and specific troubleshooting steps for your printer model. It is also important to make sure the printer is not plugged in before attempting any troubleshooting steps. It is also important to note that, if you open the printer and move things around, it could have caused other problems that could have impacted the printer performance.