Epson Office Equipment & Supplies - Page 2 - Recent Questions, Troubleshooting & Support
Epson PP-100N Rest waste ink counter
To reset the waste ink counter on an Epson PP-100N disc producer, you can follow these steps:
- Make sure the printer is turned on and connected to your computer.
- Download and install the Epson Adjustment Program utility for your specific printer model. This utility is designed to help with maintenance tasks, including waste ink counter resetting.
- Launch the Epson Adjustment Program utility on your computer.
- Select your printer model from the list of available options in the utility.
- Look for an option related to waste ink counter or maintenance. The specific wording may vary depending on the version of the utility you are using.
- Click on the "Initialize" or "Reset" button to reset the waste ink counter. Follow any on-screen prompts or instructions provided by the utility.
- Wait for the process to complete. The printer may automatically restart during this process.
- Once the waste ink counter reset is complete, close the Epson Adjustment Program utility.
- Power off your printer and then power it back on.
Epson pp100-II error L7702?
Hi
Error code L7702 on an Epson PP-100II printer usually indicates a hardware malfunction with the CD/DVD tray or sensor. Here are a few steps you can try to resolve the issue:
Make sure that the CD/DVD tray is properly loaded and aligned. Check to ensure that it is not crooked or misaligned.
Power off the printer, unplug it from the power source, wait for a few minutes, then plug it back in and power it on.
If the error persists, try removing the CD/DVD tray and cleaning the sensor underneath it with a soft, dry cloth.
If the above steps do not resolve the issue, it may be necessary to contact Epson support for further assistance. They can guide how to resolve the issue or arrange for repair or replacement if necessary.
Thanks
CR motor encoder check error
CR Motor is DC motor with brushes for driving the carriage. Controlled by CR linear encoder and CR linear encoder sensor. So, check the encoder. It may be dirty or some lines missing. If the encoder OK, other possibility is the sensor.
Not finding what you are looking for?