Epic Popular Questions, Answers, Tips & Manuals

https://thefitnessview.com/how-to-disassemble-an-epic-t60-treadmill/ https://www.treadmill.run/disassemble-a-treadmill/

Here are a few things you can try to troubleshoot the issue:

1. Check the power supply and make sure that the treadmill is plugged in and receiving power.
2. Check the fuse or circuit breaker to make sure that the treadmill is not tripping any electrical circuits.
3. Make sure that the motor and controller are properly connected and functioning correctly. You may want to check the wiring and make sure there are no loose or damaged connections.

Question edited. Wrong type of peddle/pedal :>) See if you can get in behind the monitor and look for a fuse on the motherboard to it. The manual gives a bit of routine maintenance information and it does has a full parts schematic with contact to Icon Health and Fitness, the distributor for spares. https://www.manualslib.com/manual/568149/Epic-420-R-Bike.html?page=17 https://www.google.com/search?q=troubleshoot+and+repair+monitor+on+EPIC+420R ..

This appears to be a Treadmill rather than a Tablet / eReader? Category moved to Epic Treadmill. It appears to be a known issue and there are various fixes including reinstalling the Android Operating System for the display. https://www.google.com/search?q=epic+a35t+reset ..

The white line across the screen typically indicates that a row of led pixels is dead. If this is true, you cannot repair it. The only solution is to replace the screen. Try different screens and see if it remains. If so, that is the most probable cause.

https://askyourfitnessquestion.com/question/how-to-reset-nordictrack-treadmill/

Hello, Andera - The information here may prove instructive: http://www.leapfrog.com/en-us/support/connect Also, the instructions here may be helpful: https://leapfrog.happyfox.com/kb/article/48-3114 If after following the directions on the web pages cited above do not work, then I recommend you contact Leap Frog Customer Support. See the Contact Us information for the company here: http://www.leapfrog.com/en-us/about-us/contact-us Best wishes.

It is most important that when assembling your system, all parts attached with screws, nuts, and bolts are fully tightened. That is true especially with the hand rails that are affixed to the Front of the platform to the rear. Recheck the motor mount and make certain it is solid. Every unit when assembled should be identical, however, if a part is not true (meaning it is bent, dented, etc.) it may not align 100% and make a noise when the device in in operation.

You need to replace the motor controller and walking belt.

First off remove the errant object.

If you wish to get some details; check the site linked here. http://electro-medical.blogspot.com/

Check the speed sensor an its positioning. If its ok then the motor or the motor control board is faulty. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

If you wish to get some details about treadmill repair ; check the site linked here. Pull up older posts... http://electro-medical.blogspot.com/

If you wish to get some details about treadmill repair ; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

If you wish to get some details about treadmill repair ; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Heidi, There will be quite a bit of disassembly required to remove belt, I have attached your manual, which shows an exploded view showing what has to be removed to access rollers and remove belt. you may get away with dissembling/remove front motor cover,remove rear roller and front roller. Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." http://pdfstream.manualsonline.com/d/de84f386-3308-4d84-a2ed-a52898e55aa5.pdf Treadmill Walking Belt Installation Video by Treadmill Doctor How To Remove Replace Treadmill Belt and Deck Green Fitness Company

????

If you wish to get some details; check the site linked here. Pull up older posts.. http://electro-medical.blogspot.com/

If you wish to get some derails about treadmill repair then check the below added link http://electro-medical.blogspot.com/