Emerson Televison & Video - Page 5 - Recent Questions, Troubleshooting & Support

If you wish to get some details; check the site linked here. Pull up older posts. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/ faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. Search the site by type in the brand name of your set, in its search bar at the right side column, and press enter. See it in either WebView, or by desktop. MobileView has no search box.....

repair shop time sad to say

Probable power supply failure

Need to go into the menu look for the channel setup then check the skipped channels make sure channel 1 isn't the only Channel not checked also Look at Your scanned channels in the channel list how many do you have is channel 1 it ? you may need to rescan your channels . If the TV worked OK before but Not now try resetting Your TV , BUT do this last as You will need to reset all the parameters in Your initial setup as well as rescanning channels also the Volume may blast you after reset I always install a set of earphones in the Audio phone jack first . To reset the TV Unplug it from the back of the set wait 30-40 seconds reconnect the plug while holding the Power Button Reset Your Options and Settings then Rescan your channels Don't forget the volume and to unplug earphones Good Luck If you need further help, reach me via phone at https://www.6ya.com/expert/richard_b70d968cd1a1d293

Universal remotes are cheep.

hi Jody I deleted the two duplicate posts. To see your question, you have to refresh the page. I can't track down your model, but I would say, if you have to ask, it isn't. There are a few ways to tell. The obvious one, does the remote have a 'SMART' button, that is the one that brings up all the Internet features. Does the back have a CAT5 data cable socket? If you click the television Menu, is there a section in Setup for adding your Router ID and Password. Your other question asked about 'Upgrade'. The answer is no, you need a new television, DON'T buy Emerson. Stick with established brands, not Chinese brands and nothing from Walmart!

There are rubber belts inside that run the mechanism. They dry out and stretch. Measure the belt length in mm, then divide it by 2 and subtract 2-3mm to account for the stretch. You can order square belts on amazon

The applicable code(s) would be found in a compatible remote control.

Probable power supply failure

Use the remote control to select MENU, then find the second audio program (SAP) entry and disable it.

Use the remote control to click on MENU. Find the second audio program (SAP) entry and disable it.

Search the internet for suppliers.

1. Open internal fuse 2. Power supply failure

Use code search on your RCA URC to find something that works. If a search through all codes stored in the URC fails, try a different one.

Use code search on the Philips URC to find something that works. It a search through all codes stored in the URC fails, try a different one.

Power supply failure

The applicable code(s) would be stored in the remote control, if it is compatible.

It is an antique from before the days of online manuals. There are places offering it, but they are not real sites. https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00ubClvrWXlzFiIl_LaMDWGqNOKow:1611187553624&q=manual+for+Emerson+VCR+3001 ..

Hold down the menu button on the top or side of your TV for about at least 10-15 seconds. An on screen menu will appear on your TV's screen asking you to enter the time and date and location settings. Follow the onscreen instrucitons, and once completed your TV will reset to factory settings.

more likely it has an internal fuse