eMachines T - Recent Questions, Troubleshooting & Support - Page 2
How to update my eMachines T5212 PC Desktop
please make sure you are currently connected to the internet before attempting this solution
After you have an active internet connect go to Start-->Programme--> and click microsoft update
WHEN COMPUTER COMES ON THE VGA ADAPTER SHOWS
Sounds like a "Power On Password" and you'll need it to continue. You can try pressing "Enter" with the field bland and if there was no password set, it should continue to load windows.
Please clarify if I misunderstood your issue?
Upgrade intel chip to what
What do you mean? Do you want to know what CPUs are supported by the board in order to select an upgrade or what?
Power button t3958
are you looking for the main power supply switch or to shut the computer down because the main switch is on the back of the computer towards the top of the case next to the power cord
T5026 bios download
Flashing the bios is a last-ditch move. What happened before that?
Did it work before you flashed it? If the unit is interrupted during clash, or if it is the wrong bios, your goose could be cooked.
Read this:
http://www.techpowerup.com/forums/threads/flashed-wrong-bios.180492/
There may be something you can use, especially if you have a floppy drive (a real one, not a usb-one).
You maybe can use flash drive in the usb port, but that's a long shot.
Good luck with that. I'd be looking at a new motherboard. They can be had pretty cheaply.
The motherboard is a MSI MS-7184 in a emachine
Hello
Try f2,then let the screen come up.This is your bios settings,dont change anything.
Next hit the esc key,answer yes or y key.Pc should reboot normally.
If this doesnt work hit the f10 key and select your hdd or hard drive in the options,and reboot.
Turn onboard video card
Dear,
There are two type of setting first from BIOS where you can go under peripherals option and set on board vga as a priority vga and other is
some board have jumber for switch over on board vga and agp pci express card.
most of pcs have setting from bios
best
Problem getting recovery disk
I understand that you want to reinstall the Operating System on the computer.
Select models have the ability to have the operating system reinstalled from a hidden drive built into the computer. To start the system recovery:- Restart the computer
- When the eMachines logo appears on the screen, press the Alt and F10 keys repeatedly.
- When prompted with a boot screen, hit the Enter key.
- After the system recovery program has loaded, follow the prompts to reinstall the operating system.
If the ability to reinstall from the previous method is not available or fails during the recovery, recovery of the operating system will need to be from
Recovery Media.
- Insert the disk labeled System CD into the computer's disk drive and restart the computer.
- When the eMachines logo appears on the screen, press the F12 key repeatedly.
- Select either CDROM or DVD as the boot device, this may vary depending on the system.
- When prompted for the Recovery CD, remove the System CD and insert the Recovery CD.
Note: If there are multiple Recovery CDs, please insert the first Recovery CD.- After the system recovery program has loaded follow the prompts to reinstall the operating system.
Refer the URL for more information and for the link to order the Recovery media if required.
Not finding what you are looking for?