Eaton Computers & Internet - Page 8 - Recent Questions, Troubleshooting & Support

do a continuity test on the panel

You are correct. Make sure you have checked your fuse. Please Email me at [email protected] and I can get you a user manual. I will need to know what size UPS you have also. Is it a 1.5KVA or 1500VA or bigger?

Sounds like the batteries died on the UPS. First replace the batteries. Check the fuses. dust of the UPS. it this don't work email at [email protected] and I will more info to help diagnose the problem

Hi guys, this series of UPS is modular type, that particular problem code were board problem you cannot fix that on your own.

This could be because of bad batteries or you need to adjust the float voltage. First replace batteries

these websites may help you

http://www.deccaindustries.com/PTO_install_manual.pdf

http://www.munciepto.com/Muncie%2082%20Series%20Owners%20Manual%20and%20Install.pdf

I recommend that you call Eaton (the manufacturer) service line: 800.356.5737. Here is the product page for the 3105: http://powerquality.eaton.com/Products-services/Backup-Power-UPS/3105.aspx?cx=3 You can also send an email:[email protected]

Maybe you have many overvoltage situations at your area, that the UPS can't handle. It's a good idea to put before the ups an overvoltage protection or a stabilizer. Ask the manufacture for the overvoltage protection of the ups that can handle.

Stelios.

open the ups and check whether the battery faulty or not if faulty replace it, if ok then check mosfet or IGBT used in inverter section if faulty replace it problem wil be solved