E-Machines Computers & Internet - Page 9 - Recent Questions, Troubleshooting & Support
How to use the EPF5 and EPFA board of Huawei PTN6900?
We only have EPF5 of
PTN 6900 which support maximum 50G bandwidth service and EPFA of PTN 6900 support maximum 100G bandwidth service card board,all only useful with board,equivalent to an adapter plate.
EPF5 support:EX2,EG8,CO1 and MT1 each EPF5 can put more than 4 pieces of board.
EPFA support: EX5 and EXL1 each EPFA can put more than 2 pieces of board.
Someone gave me a emachinine tower model t1742 no cords
I have purchased many different computer cords from stores, flea markets, and yard sales. Sometimes, you can find a small computer repair shop in your local area that will help you with the cords you might need and if you are really lucky, they might give you one or at least have a used cord to sell you. I know power cables can run 10 to 25 dollars retail, but I have purchased them for a little as a dollar from yard sales.
Cd rom is not working
Check that you have electrical power to the drive, i.e., push the button to open/close the tray.
Check that the "data" cable from the motherboard to the back of the drive is tightly-connected at both ends.
Or, spend $40, and buy a brand-new, CD/DVD, reader/writer, in order to replace the "dead" device.
E machines model et1831 will not boot up
try booting to safe mode. by using f8if that works, try a system restore to a previous date. if that does not help, then it must be a windows corruption and parallel install or repair install will be needed, it can also be fixed by manual troubleshooting and repairing the files.
Emachine t3414 restore to factory setting
Restart your computer now as soon as you hit the power button keep on holding Alt key & keep on tapping F10 key Alt+F10 it will open the recovery console select full factory restore and follow on screen instruction
(Note:this will erase all datas on the computer)
or you might tryDuring the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart
hope this helps you
EV1938 sound driver for win XP
At last i got the Ev-1938 4Ch pci sound card Driver.....
If any one want the Driver Plase Sent an E-mail to my "
[email protected]"email address......
I will sent the Driver Working with Xp,Vista And Windows 7..........
WHAT IS THE P7 IN MY PC FOR
Anything labeled with a "P", such as your P7, is a power connector from your power supply. Most, if not all, computer power supplies have extra connectors so that you can install extra components, like a second DVD drive or second hard drive, if you have room in your case.
How to replace the hard drive on an emachines model EL 1352 G
Take off the side panel, then remove the front panel by leveraging the black plastic clips that hold it to the metal chassis. Under the front panel will be the screws holding the dvd drive caddy in place which when removed reveals the hard drive.
Wont boot up properly looking to reformat
Check and see if there's a Disk in your CD/DVD ROM Drive. I assume there's on in there that has some bootable files and your computer see's it and is asking to boot from it. Usually it will say something like "Press any key to boot from CD" so if you don't want boot from that CD just don't press any keys.
Not finding what you are looking for?