Dual Recent Questions, Troubleshooting Help & Support

No Simon, that won't work. What you are suggesting is wiring the two horns in series, and that halves the voltage so you would have two horns running on 6 volts. They need to be wired in parallel. A lot depends on how good the horn's relay is and if it can handle the load of two horns. My thought is that it probably will as many vehicles already have twin horns. The positive lead from the relay needs to split and go to the positive sides of both horn, and the negative of the horns to grounds. Ideally, two relays, two horns, two grounds. Look at the YouTube video of the guy that added a huge locomotive twin air horn. It is funny as he goes looking for jay walkers! If I remember he had to install a second battery for it as the load for the air compressor, made the engine stall. ..

Just broke it

Yes you can replace the battery. https://www.google.com/search?q=Channel+Lock+4V+Dual+Driver+XL+replace+battery

If it's belt driven, maybe it snapped. It's just rubber.

ck here.... https://www.justanswer.com/appliance/5q4v6-thermador-pdr486gdzs-blinking-lights-blinks-top.html Parts.... https://www.appliancepartspros.com/parts-for-thermador-pdr486gdzs.html also.... https://www.repairclinic.com/Shop-For-Parts/b115/Thermador-Parts?query=PDR486GDZS Use their 800#s to talk to a coustomer service rep to verify what part you exactly need. Best to you.

I'm sorry to hear that you are having trouble accessing the DVD unit in your Primera Disk Publisher Pro. Unfortunately, I don't have access to the specific details of your device or its manual. However, based on your description, it sounds like you may need to remove the top cover of the unit to access the DVD drive. This may require removing additional screws or clips holding the cover in place. It's also possible that the DVD drive is mounted in a way that requires the entire back panel to be removed in order to access it. If you still have the user manual for your Primera Disk Publisher Pro, I would suggest consulting it for instructions on how to access the DVD drive. If you no longer have the manual, you may be able to find it online or contact the manufacturer's support team for assistance. If you are still unable to access the DVD unit, it may be best to take the unit to a professional technician or a repair center for further assistance.

If the right side tray of your Denon DN-C550R recordable dual CD player is not ejecting, there may be a mechanical problem that is preventing the tray from opening. Here are some steps you can try to fix the issue:

1. Make sure that the CD player is turned off and unplugged from the power source.
2. Check to see if there are any obstructions that may be preventing the tray from opening, such as a CD that is stuck in the tray or debris that has fallen into the CD player.
3. If there are no visible obstructions, try gently tapping on the top of the CD player to see if this dislodges any mechanical parts that may be preventing the tray from opening.
4. If tapping doesn't work, you can try opening the CD player and manually releasing the tray. To do this, you will need to remove the cover of the CD player and locate the manual release mechanism for the tray. This is usually a small lever or button that you can push or pull to manually release the tray.
5. If none of these steps work, there may be a more serious mechanical issue with the CD player that requires professional repair.

It's great that you were able to fix the left side tray by replacing the band. However, if the right side tray is still not ejecting, there may be a different mechanical problem that needs to be addressed.

The DUAL DVR-W5002 is a dual layer DVD recorder, which means you can record data onto two layers of a DVD disc. To finalize a disc on this device, you'll need to follow these steps:

1. Make sure the disc is loaded and ready for recording.
2. Press the "Record" button to enter the recording menu.
3. Select the option to "Finalize" the disc. This option is usually found under the "Disc" or "Setup" menu.
4. Follow the on-screen instructions to finalize the disc. This process may take a few minutes to complete.
5. Once the finalization process is complete, the disc should be readable on other DVD players.

Note: Finalizing a disc makes it readable on other DVD players, but it also makes it permanent and prevents further recording on the disc. Before finalizing a disc, make sure that you have recorded all the necessary data and that you won't need to add any more files to the disc in the future.

To reset the monitor on your cardio dual trainer, you can try the following steps:

1. Unplug the machine: Disconnect the power source from the machine and wait for a few seconds.
2. Plug it back in: Plug the power source back into the machine and turn it on.
3. Check the monitor: Observe the monitor to see if it has been reset and if you are able to change programs.

If these steps do not work, you can try contacting the manufacturer of your cardio dual trainer for further assistance. They may be able to provide you with more specific instructions for your machine or help you troubleshoot any issues.

I can provide you with the steps to connect a dual wireless UHF microphone system to a Yamaha RX-V683 AV receiver:

1. First, make sure that the microphone transmitters and the receiver are turned off and unplugged from any power source.
2. Connect the receiver to the AV receiver using audio cables, such as RCA or XLR cables. The output jacks on the receiver should match the input jacks on the AV receiver.
3. Turn on the AV receiver and set it to the input that the wireless microphone system is connected to.
4. Turn on the wireless microphone system and set it to the same frequency as the receiver.
5. Adjust the volume levels on the AV receiver and the wireless microphone system as needed.
6. Test the microphones to ensure that they are working properly and that there is no feedback or other audio issues.

It's important to note that the steps above may vary depending on the specific wireless microphone system and AV receiver model

Your message is to 'Alan'. We are Fixya dot com. Perhaps sending via email would be better. The wires from the amp go to the input of both volume controls. The output goes to the speakers Or forget about stereo and left and right. Have the left channel go to the jukebox and the right channel go to the extension speakers

It comes in two types, single SIM and 'Hybrid', dual SIM. Look for one slot of two, however due to sanctions against Huawei and their corrupt business practices laundering money and selling phones to Iran, they are ill-eagle to use or import in certain countries. https://www.gsmarena.com/honor_8-8195.php https://en.wikipedia.org/wiki/Honor_8 ..

GX 1200W 1-Channel Monoblock Class D Amplifier - Phoenix Gold click on manual and download it

You will have to take the CD player apart here in order to get the CD Disc that is stuck inside of the CD player.

I just got done fixing that problem on my 04 toyota camry. All I did was disconnected the orange wire. Idk how your harness is like, but mines I accidentally hooked that orange wire thats from the radio to an orange with white stripes to car harness. So as soon as I disconnected that it works with my headlights on. Hopefully this will help.

Yes. But ... have you knowledge on optimal impedances etc. .......

No instructions are available online. You may as well buy a new pair for $24 and get the manual with them https://www.google.com/search?q=concepts+ccdcir10++manual ..

Call company svc. But utube or pinterest may hav info

FIXYA DOES NOT SELL PRODUCTS NOR SUPPORT ANY