DMTech Popular Questions, Answers, Tips & Manuals

You don't. Get a remote for it. Plenty on fleabay.

French web site with manuals - you could see if they are available to you (assuming at a reasonable or no cost), and if so, go to a store that provides printing and pay for them to print. http://www.manuels.tech/n_telecharger.php?marque=LV19XTM&modele=FIXYA does not email manuals, or mail printed manuals because FIXYA is a free service.

Remote control instructions would be found in the DMTech model LT20XU manual.

you got to check for a doctor it may got to cold or flu

more likely the backlight - long strips of leds. switch on tv and shine a light on blank screen and see if u can see faint graphics ..if so its the backlight

Most likely it has bad buldged capacitors which are cheap and are not hard to repair but i would recommend having it checked out by someone who is familiar.

you can get the parts for tvs over 10 years old and under, i dont know what he means as video box as there is main av board and t-con board, main av is the logic board for all inputs and t-con is video converter for the screen. solid red light usually means power board failed, blinking is usually not enough voltage to startup or boot up.

Buy it. Who says, not to?

Display 1 1 Linegr from holland

The broadcasters love to mess about with the stations moving them around etc. You should retune the TV from scratch. Sometimes on oldler models you have to use the manual retune to get some channels back.

Freeview? I'm not good with tv words... Is freeview a free channel you stole from the neighbors dish (don't be ashamed)? If so, then you should buy cable (Cable's better. Really. Satellite dish companies looked one thing over. Storms ruin your tv.). If your just watching what you can get through the air, well, that won't work. After a while, you start to lose channels. Just get cable. If you already have a tv network, then you should call the tv company.

Hi i have a dmtech tv lq20xtv it takes a long time to come on sometimes 45 mins the red light standby is on nothing else happens any solutions is it worth fixing???????

Hi my tv takes a long time to come on any answers???

You probably need a digital converter box. Analog channels are no longer broadcast over the air. I think you can probably find one somewhere on the internet or at a local cable store/supplier.

Hello
I find a manual that helpt me

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

This is probably not that helpful but is it all plugged in or hooked up correctly? Are all cords correctly placed?

I would call the maufacturer to see if you are still under warranty. There is not a repair service for that device. Sorry.

Try right clicking the USB port and selecting "Enable Device"

Went into the settings menu, searched for the 'default' tab and reset setting to default & hey presto....all ok!!
Simple when you know how!!