Disney Televison & Video - Page 8 - Popular Questions, Answers, Tips & Manuals
Our tv remote for the Disney princess tv doesn't
Hi:
Frist use your cell phone camera mode to see if remote is putting out IR signal, you should be able to see the Infared led light up on the cell phone display, if it does then remote is good and IR receiver inside the Tv is at fault. Just point the remote at you cell phone camera while pushing a button on the remote.
My ds want start
Does it power up? if it does that you can rule out a prolem withyour power supply pac. If it does power up and it doesnt start than might be a problem in the power supply section mainly the rectifying section.Try opening it up and look for visible signs of damage.
Good luck.
G.
My remote control does not
replace the batteries.....or may be ur LED bulb in the remote corresponding to the TV is bent in other direction.....place the remote in front of TV or may be your Digital Box and use it
6/23/2011 3:42:36 AM •
Disney 13" TV
•
34 views • 0 helpful votes
I have alot of dvds
This tv/dvd combo is a NTSC DVD disc region only.Only read DVD disc from US,Canada or Mexico only sorry.Can not changes it to mutiple region to read PAL DVD disc in Europe,Asia,Middle East or Africa.Must buy a region free DVD player to play all the world DVD disc regions.
3/24/2011 3:14:00 AM •
Disney 13" TV
•
248 views • 0 helpful votes
I have a Disney Cars DVD player and I need to set
This tv was produced by some small company for the Disney Corporation,so there are no universal codes out there for this tv.100% i'm sure have original remote.Try website like Remotes.com to buy the original remote.
The screen seems like its
when picture is getting smaller in size or goes away then hit your TV lightly on left side or right side or on top & then observe ..........you will get normal picture or it comes & again it goes....if it is happening like that then following is the situation..........after 4 or 5 yrs in some CRT computer monitors & CRT TVs on main board at some soldering joints crack develops....then due to loose contact picture becomes small in size & disappears...........when we hit that lightly then those loose contacts joins temporarly & again picture appears for some time............so solution is ......TV main board should be observed carefully & most of the joints should be re-soldered.......only a good service engineer can do that........even after hitting TV lightly if there is no response then main board has to be checked completely........in your case iam sure it is loose connection problem.........joints should be re- soldered ...100% it works again................this problem cannot be solved by user unless user has idea about components( resisitors, transisitors, diodes,...etc) , have soldering iron , multimeter & other tools....................so contact good TV service engineer
4/16/2011 1:01:00 AM •
Disney...
•
87 views • 0 helpful votes
My daughters DVD player won't
First unplug it and check the entire cord for spits and or cracks. Make sure that is OK. Some outlet sockets have a circuit breaker on them. If you have one see if it accidentally tripped and reset it. Perhaps the circuit breaker in the circuit box tripped. Check that as well. Now maybe the outlet you are using is bad or went bad. Try an outlet you know is working right now. If you try all of these and it does not turn on then something inside the DVD player is malfunctioning.
I just took my Portable Disney Princess DVD player
Best Buy won't fix things that are covered under manufacturer's warranty. To fix this, you need to find the manufacturer of your portable DVD player and contact their warranty department.
This information is in the instruction manual that came with the portable DVD player.
If you have lost the warranty information, Disney may be able to provide it.
http://www.disneystore.com
Purchased the pink Disney Princess
lots of electrical items will use a default security code of 0000 or 1234.
if there is nothing in the manual and these codes do not work, then your best option would be to return it to the store for them to find the codes or refund/refpace the item
We purchased a mickey mote
did u ever find a resoulution?? we just purchased one as well. that came with mickey round up dvd..we purchased a compatiable handy manny an baby einstien dvd. we cant get mote to work...or do set-up. Any suggestions??
No power fuse is ok
It is most likely a fault within the switchmode power supply - due mostly to the ever infamous electrolytic capacitors and zener diodes (the capacitors fail which increases DC voltage through the diodes, shorting them out). It could prove expensive to repair by a service centre, if that's what you want to do. You can submit the player to your local repair centre for a quote, and get a second opinion on the exact nature of the problem, then you can make a decision about any further action for it from there.
These days, so many DVD and Blu-Ray players are becoming cheaper to buy, while repairs on the same units become more and more expensive and/or uneconomical as parts are often difficult or impossible to obtain. Unless you have electronics experience, knowledge, A-grade soldering/component measurement and diagnostic skills, plus an understanding of service manuals, do not undertake the repairs yourself.
However, it is up to you what you decide to do from here. Cheaper and easier to buy a new player - consider this option ONLY as a last resort.
I'm trying to get my daughters wii to work on her
Typically if the connection on the tv doesn't work right away with the composite cables, (red white and yellow) it's the cables.
I would suggest you replace the cables that you're using, this may alleviate the issue.
Audio went out on tv.
yes you can with a speaker but try shutting it off taken out the battery and turning it back on
Not finding what you are looking for?