Digital Lifestyle Recent Questions, Troubleshooting Help & Support

Colors is off

Hey, I had this problem on Thanksgiving Day, trying to watch a dvd on my mother's HDTV. You should be able to hook up most standard dvd players to hdtvs. First you have 3 cords, mine were red, yellow, and white. The connections go as follows:

HDTV:
Audio| Component. The white cord should be in a white audio slot. The yellow cord should be in a yellow component slot (video) and the red cord should be in a red video component slot labeled Pr/Cr. Make sure you match the component numbers. For instance, if you want to use component one, then hook all of the cords into the slots for component one. Most hdtvs have multiple component hookups ( think multiple "channels" for your game system, dvd player, etc) so it's important that the corresponding cords go to the correct component slots.

DVD:
Match the yellow and white cords to the appropriately colored slots. The red cord should go into the slot labeled component video out Cr/Pr. Not the red audio out. This worked for me. Hope this helps.

Try unplugging the TV and leaving it unplugged for about 2-3 minutes. Plug the TV back in and make sure the StandBy light turns on. Try clicking the power button and see if the TV powers up. While you are at it, be sure to replace the batteries in your TV remote (if you are using one)... this could be why you cannot power the TV on.

Yes weak signal. Also closing the laptop lid puts the computer in sleep mode.

Switch off and reset....

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://electro-medical.blogspot.com/

Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing each button on it at a time; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

It's broken. It's too old. take it to a repair shop.

Try the following website: http://www.moduslinkptstvboards.com/ TV parts repair & return

Follow the instructions found here: http://www.directv.com/DTVAPP/content/remote_codes2

For what? What is the problem you faces with this device. What is its brand name and model number? Provide more details; please.

many of the public channels were offering a coupon for a free cable conversion box... here is a LINK

the capacitors on the display circuit are bad. you can search your model on ebay and buy replacements to solder on yourself or pay a pro to do it for you.

Sounds like T'Con board fault. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/