Digimate Televison & Video - Recent Questions, Troubleshooting & Support
Replacement stand
Get/measure/mark spacing of mounting screws.
Punch through paper sheet if necessary.
Measure clearance required to wall.
Find out how much TV weighs.
Search places that sell generic stands,such as E-bay, hardware stores, Hi-Fi retailers, etc.
Match to fit or re-drill holes.
My digimate doesnt have any color??
1. Press MENU, select MISC and press ENTER
Then select Factory Reset.
It is a colour set. If that does not correct it there is a fault on the main board and it will have to be replaced.
Can't display from computer to tv
You need to connect the HDMI cable between the computer and the TV. If your computer has no HDMI, you can connect the VGA cable to your TV VGA input. If the TV has no VGA input but has a composite RGB RCA receptacles, then get a adapter cable that has VGA on one end and 3 RGB RCA plugs on the other end.
How do I reset my tv
To do a factory reset, you have to enter its service mode option. If you wish to get some details; check the site linked here. Viewing it in "
Mosaic" or "
Magazine" will make surf easy. Pull up older posts. Surf the site with patience.
Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
Digimate TV DGL20 REMOTE CONTROL
Use just about any remote and use the code for a Protron TV.
1) 0178
2) 0466
3) 0052
4) 0003
First one worked for my digimate 20"
Not finding what you are looking for?