Dictaphone Audio Players & Recorders - Page 6 - Recent Questions, Troubleshooting & Support
Foot pedal FF or Rewinds when pressing Play
It's possible that there's a broken wire in the cable that connects the foot control to the machine. This usually happens near the plug that plugs into the machine, or by the end that goes into the foot control.
You can usually duplicate it if you put the auto-backspace up a bit and then hold down the play pedal on the foot control. While holding down the play pedal, try moving the cable near the machine or near the foot control in a circular motion. If the machine stops, rewinds or fast forwards, then odds are that the problem is with the cable.
Any function I press on the foot pedal results in
Hello you have your unit set up for Hands free recording Follow the next step
Press and Hold Search and Erase at the same time then you will be and the setup mode press play into you see hands free and press FF to say No then press Pay and press stop to exit.
Foot pedal does not work
Make sure the foot pedal is plugged into the SIDE of the machine and not the BACK of the machine. I've seen many people make this mistake...
Dictaphone transcriber 3750 won't play, reverse,
Does anything show up on the display? Like 'No Cassette' or 'End Tape'?
Are you using a foot control? Does the tape move when pressing the buttons on the machine itself? Is the foot control plugged into the side of the machine (and NOT the back)?
Necesito el diagrama electronico del Dictaphone
Sorry, I don't speak spanish, but try replacing Q609 on the main PCB. It's located on the top, towards the front of the machine.
Also make sure that the motor doesn't have a 'flat spot' (that it stalls). This is generally what blows the Q609 transistor. If you have power to the machine and a cassette in, try manually turning the motor to see if it'll start on it's own.
Wont play cassette
Usually when this happens it is either the "Pinch Rollers" or the "Drive" motor, has failed. You need to get it looked at.
When I try to record, it says
Make sure the cassette protection Tab on the bottom is not broken if the cassette is not broken you need to send the unit for service Send an email to
[email protected] or call (800) 644-9525. Please indicate model, serial and detailed description of problem
Just put in my first tape for the 2740. Even SLOW
Hello this transcriber is only a 4.8 Speed transcriber and the slide speed control is on the front of the unit if the cassette that you are trying is a Normal 4.8 speed and is not responding you need to send your unit for service you can try this place Send an email to
[email protected] or call (800) 644-9525. Please indicate model, serial and detailed description of problem
Not finding what you are looking for?