Daewoo Washing Machines - Page 8 - Recent Questions, Troubleshooting & Support

Hi, you didn't mention the model, but on the washer/dryer combo units, the H1 means the following: Dryer temperature sensor error detected A fault has been detected with the dryer temperature sensor on washer dryer models.

• Check connections to dryer sensor
• Check temperature sensor

Jayshree, E9 error, pressure sensor error/water sensor error. Replace water level sensor. The error display disappears if power button is turned off and on.This is what the service manual states. Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." Daewoo DWD M103 Service Manual Page 15 of 16 Daewoo CV701PC Service Manual Page 26 of 52 Daewoo Washing Machine Error Fault Codes Washing Machine pressure switch

A soliniod must be jammed open with crud ,try putting a good cleaner through the machine clamping off the drain hose.

http://homenol.blogspot.com/ Visit this site to get some details.

replace the lock switch

the link below is for Daewoo, press the helpful button http://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes/3369-generic-daewoo-washing-machine-and-washer-dryer-fault-codes

LE Washing machine door opening error The washing machine or washer dryer door has been detected as open or unlocked. ·Close the door! ·Check the door lock switch ·Check the door latch ·Check PCB

Water inlet error - washing machine failed to fill The fault code is displayed, if the washing machine does not detect any incoming water. ·Check wiring to water inlet valve ·Check water valve ·Check drain pump ·Check pressure switch Check PCB

Washing machine motor error detected A fault has been detected with the main drive motor. ·Check motor connection block Abnormal loading condition

Washing machine door opening error The washing machine or washer dryer door has been detected as open or unlocked. ·Close the door! ·Check the door lock switch ·Check the door latch ·Check PCB

E3 = insufficient water

ie is a problem with water inlet'check no hoses are kinked behind machine and that water is fully on

English plzz