Daewoo Televison & Video - Page 5 - Recent Questions, Troubleshooting & Support

No value used, no one wants this old technology anymore.

Check out this great resource https://www.manualslib.com/brand/daewoo If you need further help, reach me via phone at https://www.6ya.com/expert/michael_e7c2c48c6e65f808

There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electro-medical.blogspot.com/ http://homenol.blogspot.com/ http://electronicshelponline.blogspot.com/ If blinks continue without any pause, the main board is faulty. Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

DEFAULT CODES ARE NORMALLY 0000 OR 1234 HOPE THIS HELPS

It's been years but in case any poor future soul comes across this site, this is a solvable problem, if you have an older gray/silver Comcast remote. Plug the white/yellow front cables into your cable box, then the remote can be programmed using the instructions on the Comcast site for Daewoo, after that you hit the tv/cable button and viola, off line in and on to antenna!!