Dacor Ovens - Popular Questions, Answers, Tips & Manuals

f resetting the high temp limit switches did not resolve the issue, it may be a problem with the broiler and bake elements themselves or with the wiring and connections that supply power to them. It would be best to have a qualified technician inspect and diagnose the issue to determine the necessary repairs.

Try a spray of switch and contact cleaner spray with the power turned off. Get behind the buttons if possible.

If the element in your Dacor W305 oven will not turn off, there are a few things you can try:

1. Turn off the power to the oven by unplugging it or switching off the circuit breaker. Wait a few minutes and then turn the power back on to see if the element has reset.
2. Check the oven's temperature sensor. If the sensor is faulty, it may be sending the wrong signal to the oven's control board, which can cause the element to stay on. You can test the sensor with a multimeter to see if it's functioning properly.
3. Check the oven's control board. If the control board is faulty, it may be sending a continuous signal to the element to stay on. You may need to replace the control board if this is the case.
4. If the element is physically damaged, it may be causing a short circuit that keeps it on. In this case, you will need to replace the element.

If none of these solutions work, it may be best to contact a professional technician to diagnose and repair the issue.

It sounds like you may be having an issue with your Dacor double oven. If the relay board is preventing the oven from working, there could be a problem with the board itself or with a component it controls. To troubleshoot this issue, you may want to try the following steps:

1. Check the oven's electrical connection and circuit breaker. Make sure the oven is properly plugged in and that the circuit breaker has not tripped.
2. Check the relay board for any visible damage, such as burnt or melted components. If you find any damage, the board may need to be replaced.
3. Check the oven's thermostat. It is possible that the thermostat may be faulty and not allowing the oven to heat up.
4. Check the heating element. If the element is not heating up, it may need to be replaced.

If these steps do not help resolve the issue, you may need to call a repair technician to diagnose and fix the problem. It is generally not recommended to try to repair an oven yourself, as it can be dangerous and may void the manufacturer's warranty.

ck this out...... https://www.youtube.com/watch?v=lyRjIxGHWW4

If your Dacor wall oven displays "OFF" in red, it means that the oven is not turned on or is in standby mode. To turn on the oven, follow these steps:

1. Press the "Bake" or "Convection Bake" button.
2. Use the "+" and "-" buttons to set the desired temperature.
3. Press the "Start" button to begin preheating the oven.

If the oven still displays "OFF" after following these steps, try turning the power to the oven off for a few minutes and then turning it back on. If the issue persists, there may be a problem with the oven's control board or wiring and you may need to contact a qualified appliance repair technician for further assistance.

Hi, you might want to shut the power down to the unit and then call Dacor directly to help you troubleshoot the issue. Their phone number is 1 (833) 353-5483. Thank you.

You have a failed control, or valve. turn off the gas feed immediately. The fix is to replace the control or valve. Be sure you have the skill set if you are attempting to replace the control or valve yourself. A mistake could seriously hurt or kill you.

It obviously is requesting you to replace the fan and or the relay. If it comes with the oven it is definitely needed.. Bypassing anything could cause a fire and you would lose your home. I wouldn't bypass it. Please have it repaired correctly by an authorized repairman.

http://www.uncleharrywizard.com/nephewclub/wizardrange/dacor/dacor-technical-manual--.pdf

?????? ????? ????

Basically, it is 22 years old and ready for replacement.

https://www.youtube.com/watch?v=XaUmMeh-vqA

were the both the same voltage and don't touch the bulb with your fingers us clean rubber gloves

https://producthelp.jennair.com/Cooking/Wall_Ovens_and_Ranges/Oven_Product_Assistance/Possible_Causes_for_Poor_Baking_Results https://www.samsung.com/us/support/answer/ANS00060968/ https://products.geappliances.com/appliance/gea-support-search?Nrpp=96&No=1&Ntt=double%20oven

Check online or maybe EBay

C77 means replace glass / touchpad assembly

Step 1 Locate the "Clock" button on the display. The display is located above the oven door. It clearly shows the time and has settings for temperature, time and cooking. Step 2 Press and hold the "Clock" button until the time starts to blink. Step 3 Set the time with the number pad. Ignore the colons and enter the number straight through. For example, if the current time is 10:08, just type 1-0-0-8. Step 4 Set AM and PM by pressing the "#" button. Press "Start" to finish.

Page 9-48 in technical manual excerpts at the link below: http://www.uncleharrywizard.com/nephewclub/WizardRange/dacor/dacor-wall-oven.pdf http://www.uncleharrywizard.com/nephewclub/WizardRange/dacor/dacor-wall-oven.pdf It says to call for service (by a technician). (I am only reading it from the document - I am not a technician.) It says to replace glass/touchpad assembly. It says wrong or unrecognized diode configuration.

FixYourBoard.com will test and remanufacture the relay oven control board in this model. Each rebuild comes with a two year warranty. Reach out to us at 512-355-1108 or [email protected]