Dacor Ovens - Page 9 - Recent Questions, Troubleshooting & Support

It is possible that the lamp is being powered through a ground loop in the stove or a contact in the control, is not disengaging. The lamp is possibly a neon bulb and I have had this happen . It is usually not a big concern and difficult to track downif it is a ground loop.

this could be the control pwb or touch pad is bad

i just had a similar problem .the door would fall and i had to lift the top of my door hinge to close it .I found that the pin on the door hinge spring had fall.en out . I installed it back and now it works the way it should.the spring should feel tight with no movement.

Are you buying hi quality oven grade lamps for this purpose that'll take the intense heat inside an oven? I wonder if they're halogen or tungsten filament lamps. Defective solder, frosty joints and/or ring fractures on lamp driving areas of a circuit board ARE indeed capable of causing problems with lamps.