D-Link Computers & Internet - Answered Questions & Fixed Issues

Yes, you can reset the password on your D-Link DIR-300 router. To do this, follow these general steps: Access Router Settings: Connect your computer to the router either via a wired or wireless connection. Launch a web browser and input the IP address of the router (frequently 192.168.0.1 or 192.168.1.1) into the browser's address bar. Login: Enter the router's username and password. The default credentials are often admin/admin. Navigate to Password Settings: Look for the "Setup," "Wireless," or "Security" tab in the router settings. Find the section related to changing or resetting the password. Reset Password: Follow the on-screen instructions to reset the password. You may be asked to enter the old password before creating a new one. Save Changes: Save the changes and reboot the router if required. Please note that the exact steps may vary slightly based on the router model and firmware version. If you Need More Router Support visit: Geek Squad Assists.

To reset the D=Link back to the default settings -
Press the RESET button at the back of the router and power it up. Hold the RESET button for 5 secs. until the LEDs flash at the same time.
Connect a LAN cable from the D-Link to your computer's LAN port, open a browser and enter the D-Link;s configuration URL.
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now go to the wireless settings.

To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Hi,

Two things you can try before trying your browser/Internet connection:
1. Right click on the Wireless Network Connection Icon, click on Repair. Allow the computer time to repair its WiFi connection and some other settings;
2. Right click on the Wireless Network Connection Icon, click on Status. Click on properties button, select TCP/IP (Internet Protocol), click on Properties button, verify that the option "Obtain IP address automatically is ticked, OK, OK.
3. In your browsers, verify/modify settings:
In Mozilla, click on Tools, Options, Advanced tab, Network tab, Settings button, tick "Auto-detect proxy settings for this connection, OK, OK;
In IE, Tools, Internet Options, Connections tab, LAN settings button, check "Automatically detect settings" (& pls make sure there is no check mark on the Proxy server), OK, Advance tab, check Use HTTP 1.1 through proxy connections.
In Opera, Tools, Preferences, Advanced tab, Network, Proxy server buttons, check "Enable HTTP 1.1 for proxy, OK, OK.

Pls post back how things turned out or should you need additional information. Hope that this be of some help/idea.

Good luck and kind regards.

I also meet this problem, I use the portable mobile internet, when I try to rename it, it name became HT-AP0. Here are the content I learned from computer eginnering, you can try to reset your network( it should be a bottom you can press), or you can try to let the electrode shortcircuit, and erase the imformation. cause this phenomeon is because of hacking. Unfortunately my network's reset bottom is broken. So good luck to you! I am not a native speaker so forgive my word mistakes! THX!

You can find the details of the operator and the state they belong to .the operators wont reveal the address and name of any mobile numbers only higher officials can only get those information.
In order to trace the operator name and state you can try this link
http://www.indiatrace.com/trace-mobile-number-location/trace-mobile-number.php

I hope this will help you if it does do rate the answer
Thank you
regards
lalith

You probably have to buy another switch. However, before you try that - the eighth most right cable - switch that out to see if it was a cable problem. That's an easy thing to try before you buy another switch.

I am sure it is now toast and you cannot downgrade if the wrong firmware has been installed. I would ask D-Link.

QuickBooks Automated Password Reset Tool Have you lost or forgotten your administrator password? follow this link http://support.quickbooks.intuit.com/support/PasswordRemoval.aspx for more help visit QuickBooks Technical Support

I would suggest downloading the manual and check the settings for your country.. it can be found here. http://support.dlink.com/emulators/di524_revc/h_lan.html

Log in to your wireless router or modem. Go to Advanced and disable AP isolation. To know more about it in details visit: How to disable AP isolation in wifi router?

Hi Challywags,

Normally if the router's power light is orange, red, or blinking there is problem with it's software/firmware. Or in some worst cases, it might also be a faulty unit already.

Here are things that you can try:

* Unplug it and wait for 1 minute before powering it on.
* Reset the router using the reset button. Note, this will restore the default settings configured in your router. You may need to reconfigure the router after doing this.

In case none of the solutions above will work, and none of these steps will turn the power light green I recommend that you contact the router's manufacturer for further troubleshooting. If the device is still under the warranty you will be able to get it replaced.

https://www.youtube.com/watch?v=zKeXtyUMKjA Check out this video it might help you with your issue.

Please open router page and go to advanced just like in this emulator. http://support.dlink.com/emulators/wbr2310/adv_network.htm

http://support.dlink.com/emulators/wbr2310/lan.htm

try changing the channel number from auto to a channel number 2 or 3 higher than the lowest channel number.' do this by logging into the d-link dsl 2640

Signal tracking progress features have been observed to apply for poor signal monitoring of the Condor Party of GPS Media Trouble. With performance and fast startup bars, Condor GPS modules enable system integrator to easily connect the Global Positioning System (GPS) to a mobile device whose size or battery life has a very low cost effect. The Condor GPS family includes modules with various form factor and interface options. The Condor GPS family has multiple modules with different form factor and interface options. All modules in the family offer top level positioning performance. The features and attributes listed below are ideal for all condom GPS modules in the family. Trimble's Condor C1216 GPS Receiver Module is a smart alternative to a GPS chipset with many consumer and commercial location applications. Nowadays, in current network communication projects, optical transceivers, optical fiber transceivers and optical modems can be widely used and highly respected by security personnel. So, are you aware of the differences between these three safes? An optical modem is a type of device that is similar to a base band modem (digital modem). The difference from a base band modem is that it is connected to a dedicated optical fiber line, which is an optical signal. It is used for the conversion of photoelectric signals and interface protocols over wide area networks and the access router is access to wide area networks. Photoelectric transceivers use photoelectric signal conversion on local area networks but only signal conversion without interface protocol conversion. It is typically used over long distances on campus networks and is not suitable for environments where rolled welded wires are deployed. To clean the optical modem, photoelectric transceiver. We need to introduce the environment in which they are used. Known as the single-port optical transceiver, it is a product designed specifically for a user-friendly environment. It uses a pair of optical fibers for single E1 or single V35 or single 10BaseT point-to-point optical transmission terminal devices. As relay transmission equipment on local networks, these devices are suitable for optical fiber terminal transmission equipment of base stations and leased line equipment. For multi-port optical transceivers they are commonly called "optical transceivers". For single-port optical transceivers, they are usually used for the user. They act like the base band modem commonly used for WAN dedicated line (circuit) networking. "Optical Modem" and "Optical Network Unit". https://www.allhdd.com/networking-devices/transceiver/

Solution for the mouse. I have 8 KVM's. Most of my computers work with the KVMs. On 1 inland KVM the logitect and Microsoft optical mice do not work on one computer (but work with the other computers). They both are USB. I hook them up with a USB to PS2 adapter. If I use a ps2 ball mouse connected to the KVM the mouse works. All the Mice work if I directly connect them. Since I do not want a ball mouse I got a Frisby optical PS2 mouse. It works with all the computers on the KVM's.

I do not have a solution for the Keyboard yet. 1 computer (ASUS MB) on my trendnet or belkin 4 postion KVM does not recognize the keyboard.

hi r_raiche

1. Take a regular ethernet cable and plug it into the ethernet port of your computer

2. Plug the other end into ethernet port of the DWL-710

3. On your computer (assuming you have Windows XP Pro with the NON-classic start menu), go to Start > My Network Places

4. On the top left under "Network Tasks" click on "View Network Connections"

5. Right click on "Local Area Connection" and then down to "Properties"

6. A pop-up window with 3 tabs should come up. Under the "General" tab, there is a list of icons with checkmarks next to them. Highlight the "Internet Protocol TCP/IP" on and click the "Properties" button underneath

7. Tick "Obtain an IP address automatically" and "Obtain DNS server address automatically"

8. Click on "OK" then "OK" again

9. Open up Firefox (or IE) and type 192.168.0.30 into the URL field

10. Type in the default username and password

Check the LAN cable between the router and the internet modem and try another cable. Obviously rebooting both is orth a try.The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.

Ethernet/USB Print Server it is for even windows 98 (OMG ) page 7 is setup. NO OS stated by you, at all. why:? page 3 is OS compat. after reset the default address is 192.168.0.10 5volt power pack is NOT OPTIONAL. 1998 what did you read the free manual yet. the last page shows printer compatibility list, does your match? where would you find a printer that old working now. crickets...??? my guess is 2003 year made. XP first release is that. one manual for it stamped 2003 so is 17 years old relic fodder for sure, recycle it is best. first hit https://eu.dlink.com/-/media/consumer_products/dp/dp-300u/datasheet/dp_300u_datasheet_en.pdf RTM ! no 17 year old printer works today, not really.