D-Link Computers & Internet - Page 7 - Recent Questions, Troubleshooting & Support

you can reset your router, at the back you easily find very little button which indicates that is the reset button. press reset then you will be able to fix your new user name & password.

Thanks

is this adapter?? i think their is no fuse in wireless router.....If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

If you can't remember the password, follow these directions to reset the access point to factory default. You can then log in with a username of admin and a blank password. DAP 1360 Wifi Access Point Hard Reset PCingredient If you know the current password, just log in and change it on this page http://www.support.dlink.com/emulators/dap1360/101/tools_admin.htm

i want chenge password

The nook is designed to attach to a PC (or AC) with The cable that came with the nook. IF your PC does not have a USB port, it cannot connect.

Username is "admin" Password is blank

go to an internet browser on a pc connected to router type in address url http://192.168.0.1 type admin for the user name leave password box empty click ok don't use wizard click on wireless button on screen select enable for wep select asci then type in a password key for the wep that you will remember click on apply bottom of screen page 12 - 14 https://fccid.io/KA2DI774VB1/Users-Manual/Users-Manual-1-357565.pdf

Contact D-link support number 1-888-494-1155 (Toll-free) usa and find instant help by expert D-link technicians.

put one of them in DMZ zone or use port triggering.

do you have a good internet connection?

factory reset

Do a reset back to factory defaults. Hold the button down in the pin hole for 30 secs.

How do I log into my D Link wireless router?

• Open up a Web browser.

• Type the address "http://192.168.0.1" or "http://dlinkrouter" (omit the quotes) into the browser's address bar, and then press "Enter."

• Log in to the D-Link router with the administrator username and password.
• The default username is Admin and the password is blank (nothing).

Noone supports Windows XP anymore. I wouldn't count on any driver updates.

Verify that your laptop can connect to the D-Link. Then on the laptop, in the search window enter CMD. In that window enter " ping 8.8.8.8" If you get a response - actually 5, then your likely issue on the D-Link is DHCP settings. Enter "close" to close the black CMD screen. A response proves that you have Internet access but only to numeric addresses. Use the supplied disk or instruction manual to log into the D-Link and update the settings. If you get no response, go through the full setup procedure on the D-Link.

What version of windows and how are you connecting to the router?

I don't think it's your server; it sounds like you need to change your network settings so you get your IP address from a DHCP server; it sounds like you have a static address and possibly your computer's IP address is the same as the server.