What is the colored wire positions on a craftsman 2400 mower key switch
See following URL for complete wiring diagram.https://www.searspartsdirect.com/model/3x23oa7iyt-000247/craftsman-917203831-front-engine-lawn-tractor-partsSwitch Terminal to circuit color.B RedS WhiteM Black (Black/white)A1 BlueA2 BlackL BlackG BlackUnfortunately 4 of the circuits are not uniquely color coded. If the black wires have been disconnected from the switch socket then it will be necessary to identify each black wire to its respective circuit.
10/13/2023 5:49:31 AM •
Craftsman...
•
Answered
on Oct 13, 2023
What powers carburetor solenoid on a craftsman model 316.711200 weed wacker
The power source comes from the ignition module(coil), Power is stepped down internally in ignition module to something between 9v and 18v(can't remember exact voltage for sure at this time).
I don't recall seeing one on that model go bad. usually it ends up being the carburetor. Or incorrect spark plug that is the culprit(If cylinder is O.K. and you have spark).
Hope this helps.
How to install drive belts on a craftsman table saw model # 218290?
Remove the side panel (key number 21) the dust cover (key number 23) guide holder (key number 29).
Use a 19MM or a 3/4 inch deep socket with a long extension and ratchet. This will keep your hand out of the way.
Now rotate the arbor counter clockwise and deflect the top edge of the belt downwards onto the arbor to catch the grooves.
Continue to work the belt around and checking at the motor shaft.
Once the belt is in place work it down by deflecting the top edge of the belt.
reference > http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/Saw-Parts/Model-315218290/0247/0744600?pathTaken=&prst=0&shdMod=315218290
Not finding what you are looking for?