Compaq evo - Popular Questions, Answers, Tips & Manuals - Page 3
I cant see the cd-rom boot order on my boot order sequence
Can you see you cd drive in windows explorer ?
if not it might br a registry problem.
Click start control panel administration tools computer management device manager scroll down cd-dvd rom drives you might see a yellow question /exclamation mark ? ! or a red X right click to update driver
You might have to physically unplug the leads for this cd/dvd computer then plug them back in restart your this should activate the found new hardware wizard.
If this does not fix the problem it might be a registry problem
"you only need to do the following"
if you cant see your disk drive in windows explorer
Close all open programs
Click on Start, Run, and typeregedit and press Enter
Click on the plus signs (+) next to the following folders
HKEY_LOCAL_MACHINE
SYSTEM
CurrentControlSet
Control
Class
{4D36E965-E325-11CE-BFC1-08002BE10318}
This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.
Upper Filters
Lower Filters
Upper Filters.bak
Lower Filters.bak
If any of the above keys shown in step 4 are listed, right-click on them and choose Delete
After deleting the keys, close the registry editor
Reboot your computerOpen My Computer and check to see if your CD or DVD drives have returned.
You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.
Solve hang problem
There are some possibilities through you can increase performance and solve ur hanging problem.
1. Open command prompt and type chkdsk and press Enter. after few seconds it will ask for Y/N and type Y and press Enter.
2. Type defrag c: -f and press enter. It ill defrag your c drive.
3.Click on Start>All Programs>Accessories>System tools>desk Cleanup and it will scan the temp files and will delete them after clicking on OK after scanned.
4. If this not solve the issue then run the system in safe mode and check is it hanging on the safe mode then there might be some issue in hardware otherwise needs to install the OS again.
Replacing all the desktop parts
Dear Lloyd,Thanks for posting your problem in Fixya. If you are planning to change your current desktop into a gaming one, yes, you can use your old casing. Hope this helps, Regards,Mrityunjay
Will only run on safe mode
Restart your computer
During the boot process you
will see on the screen a certain key to press usually the Delete or F2 to enter
setup this may vary depending on your computers bios other possible keys F10
Acer: - Ctrl +Alt +Esc
ALR PC: (F2) or (Ctrl)(Alt)Esc)
AMI BIOS: (Del), (F1) or (F2)
AST, Advantage, Award, Tandon: - Ctrl + Alt + Esc
Award BIOS: (Del) or (Ctrl)(Alt)(Esc)
Press and hold that key
during the boot up process to enter BIOS using the arrow keys navigate
load
failsafe defaults or load optimized
defaults press escape then press f10 to save to cmos to restart
BCM5701 Ethernet
You need drivers for your Broadcom 5701 network interface card, and drivers for the others too. Go to HP website and look up that model. All the drivers should be there.
How much i upgrade processor
http://www.cpu-upgrade.com/index.html
You will need to type motherboard name ID and the cpu
ID
Significance
Upgrading to more modern operating
systems depends on the type of processor in the computer.
One of the main differences between
the two systems is that a 32-bit operation requires either a 32-bit or 64-bit
processor, while a 64-bit version must have at least a 64-bit processor.
Identification
The operating system will register
different on each computer that is running the platform. When a user clicks on
the Start button, they can go to the Control Panel, followed by the System and
Maintenance tab and click on System.
This will show whether the computer
is running a 32-bit or 64-bit operating system
Not finding what you are looking for?