Coby kyros - Recent Questions, Troubleshooting & Support - Page 5

There are two methods of reset Coby Kyros MID8024: 1. Soft Reset 2. Hard Reset Steps for Soft Reset:

• Take out the battery.
• Reinsert the battery.
• Press and hold the power button for 10 seconds.

That's soft reset. If your device doesn't load after this, try hard reset. Steps for Hard Reset:

• Switch off the device.
• Press and hold Volume Up + Home Button + Power Key.
• After 2-3 seconds, release the Power Key.
• You will enter boot screen, Select Wipe Data / Factory Reset.
• Select Yes.

This will delete all the files including apps, personal data stored in phone memory. Don't worry it doesn't wipe off the SD Card so you should make a backup of your files stored in phone memory.

What is the extent of the damage? Size of crack, apparent depth, shape, and location on the tablet?

sometimes it get over heating soo give it some time to cool of !!

Hello,I had the same problem with my new tablet and I sent it back to Coby and still have not got my new one.The company is sorry as far as I'm concerned. I tracked my tablet and it got to them on Dec. 7th and I still have not got my tablet,no replies from emails,nothing from Coby!!!

http://www.howtogeek.com/201980/how-to-mount-a-flash-drive-on-your-android-device/

try to hard reset or soft reset, for this procedure search on gogle.com how to reset tablet, that will be helpful.

try removing the battery for 30 min .

Which phone is this on? I will post results how to fix and cost of repair :)

1. With the pad OFF depress the "-" key on the volume control and the power button at the same time and HOLD them down until the "Coby" splash screen comes up. 2. KEEP HOLDING THE "-" key down and RELEASE the power button until an android is displayed lying on its back. 3. RELEASE the "-" key and press the " " key on the volume control You should see the Android system recovery options on the screen. 4. After the menu appears, select the "wipe data/factory reset > Yes " menu item by pressing the "-" key until the cursor is on the line 5. Press power button to select 6. After it goes through resetting, using the volume key to navigate to the "reboot system now" menu item 7. Select the menu item by pressing the power button to select 8. Your mid9042 will now boot to an unprotected screen, BUT you will have lost any applications you downloaded. You will, however, save all pictures, etc. you have loaded. .

You need to re-install the firmware, not the original one, but a clean version that is available here: http://www.craigelectronics.com/firmware_update/android4.0/cmp741e_firmware4.0_cleaner.rarWill reboot several times, and fail the first run, but it will work on restart. It has worked for me and at least 2 other people that I know of.

unlock it then

Send back, i have the same problem

Perhaps you should reset it and set it up again? Everything is in the manual. Here is a link to the manual: http://s3.amazonaws.com/szmanuals/c551b11cce424bc93b38ce7f3290791a

Go to Google or you tube and enter the information of you device that you intend to fix. I did it when my clr get broken , I get a video step by step. Good luck.

Polarity or voltage? Most adapters are AC , tablets usually 5v 2amp

Either you have a bad battery or the charger is not putting out the correct voltage to charge it. Check the output of the charger, if its OK, the batery is bad.