Clarion Car Audio & Video - Page 3 - Recent Questions, Troubleshooting & Support
Clock settings on clarion db346mp wont set time
See if this works for your item. It was posted in 2009:
Setting the Clock
1) Press and hold in the BAND button [4] then press the DISP button [9] to toggle the display to the clock mode.
2) Press and hold in the BAND button [4] then press and hold in the DISP button [9] for at least 2 seconds.
3) Select left or right to adjust the time using the a-selector
~Adjusting minutes
Each time you select right >> using the a-selector [3], the minutes increment up by one digit (0 to 59).
~Adjusting hours
Each time you select left << using the a-selector [3], the hours increment up by one digit (1 to 12).
*The clock only displays time in a 12-hour format.
There is no way to toggle the clock to a 24-hour format.
4) Press the BAND button [4] to set the clock into memory. This also resets the seconds counter to zero.
Note:
*The clock can only be set by turning power on to the unit and switching to the clock display mode. You cannot set the clock when it is displayed with only the igntion on. If you drain or remove the car's battery, the clock must be reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.
Clarion vz401 unlock reset?
ok i have a vz401 and it was locked out so what worked for me is.
hold the volume down button then push the power button after you are holding down the volume button.then if you dont know the code put in 4356 it worked for me
Not finding what you are looking for?
