Chevrolet Toys - Popular Questions, Answers, Tips & Manuals

https://www.google.com/search?q=1987+Camaro+Z28+IROC.+Routing+of+heater+vacuum+line ..

Ken, That is totally up to you and your comfort level. IF the purchase price is reasonable (you can find plenty of pricing by online searches) and you like the vehicle, then take it to the next step. Since you are not mechanically inclined, take a mechanic with you who can inspect the car bumper to bumper and point out any inconsistencies or potential mechanical issues. I hope this helps!

The horn is negative ground operated. When U push the button it makes a ground and honks. If you don't have it installed the wire is touching metal that's why it honks. When the horn is pushed it completes the circuit. As to reassembly Very hard to explain so I suggest you get a pic on line from repair manual try Auto Zone site free. You can use the book from mid 60's thru early 70's for Chevy, buick, olds, pontiac or cady gmc truck The horns are all basically the same, Mike

This vehicle year doesn't have/use a heater control valve. What is the problem with the heater?

Probably chevy collector websites.l

You need a diagnostic scan to see what the code is. Might be a simple resets

ALTENATOR IS NOT WORKING ,MAKE A TEST START THE CAR WIHT A NEW BATERRY ,TAKE THE POLE .ANY POLE OUT IF THE CAR GOS OUT THE ALTERNATOR IS NOT CHARGING

you need more lead in your fuel ! that's probably because it`s an old car it ran on much richer fuel than the unleaded that we have today ! if you want ....,turn the key off while its in drive , and it'll go right off , and then put it in park.... that way you'll save the clang and you can also purchase trick fuel ! i have a 64 Dodge Dart , i had same problem at one time . Phillip 76 stations carry trick fuel.

Does it make a difference whether the engine is cold or hot? Can make a difference in diagnosis.

The heater core is located behind the passenger side dash and the dash must be taken out in order to reach it. The rest is easy.

This is in the wrong forum area.

The resister in the new key must match the resistance originally set in the car. Take your original key to an auto-locksmith and have them read the resistance pellet in the key and use a blank with the same resistance to cut a copy of your new key. Even in 1992 the vehicle anti-theft system prevents people from using keys that turn the swiitch and not matching the resistance.

Your shifter didn't transition to the reverse gate, and probably is stuck in a forward gear. Get it on a lift where you can safely get under and move the linkage to the neutral position. If it happens again, check adjustment and lubrication of the shifter and the linkages from tranny to shifter.

to remove the starter form a Revell Model you will need a hot knife and exact blade

Remove the to bolts to the starter and the nuts holding the wires on.

check transmission fluid level

Replace fuel filter and HT leads to spark plugs.

No vehicle will work without a cat Federal Laws require they be there & at 92% efficiency,have to be replaced Won't store oxygen & won't have any fuel control or proper O2 Sensor Voltages Converter last 12 to 14 years So the vehicle has had many problems over the years not picked up on No Lemons-- just never do any Preventative Maintenance or ignore obd 2 dash fault lights

Centre terminal of switch to horn button, ground wire from each horn separately to either side of switch. I assume the switch is a single pole changeover switch. Regards w