2000 Chevrolet Silverado Oxygen Sensor (O2S)where
It's inline in the exhaust system. You'll see one on each bank of the engine before the catalytic converter and one or two behind the converter. It's fairly easy to change, get your hands on an O2 sensor socket and get an OEM GM replacement sensor, don't cheap out or you'll be asking for trouble.
Firing order for 1998 s10 2.2l with coil packs
The firing is 1 3 4 2. From the front of engine to the back, the cylinders are numbered 1 2 3 4.
Cylinders 1 and 4 are on the same coil pack. Cylinders 2 and 3 are the other coil pack.
My 1994 Chevy 1500 4x4 wont go into four wheel drive.
Sounds like the problem that I had with my '94 chev sub k1500, twice!
The first time it was due to a blown fuse. Now I carry a spare 20A fuse when I go off-road.
The second time the electrically controlled/heated, fluid filled actuator mounted on the front diff failed. I now carry a spare actuator when I go off-road.
the actuator is powered when the switch on the top of the transmission is energized. I have had no problems with that switch, or the connecting wiring.
2005 Chevy Malibu Maxx no ignition cylinder.
The simplest solution here is to have the ignition barrel replaced. There is so much electronics involved in a modern cars bypassing (hot wiring) the ignition can just cause more problems and usually expensive ones. The barrels themselves aren't that expensive and any good auto electrician should be able to fit and code the keys for it. Sadly it's the fitting that could be the expensive bit.
Not finding what you are looking for?