Centrios Recent Questions, Troubleshooting Help & Support

What's the program you are using? You can try burn your disc on PC with a professional DVD/Blu-ray burning program, it should be more promising. And you don't have to manually finalize the disc. 5 Best Free Blu ray Burners to Burn Blu ray Easily

https://mb.nawcc.org/threads/setting-a-centrios-atomic-clock.32197/ If the atomic radio controlled clock is off by one or more hours, it probably has to do with the time zone setting. ... Other atomic wall clocks may allow the selection of any time zone, even time zones that are outside the WWVB coverage area. When purchasing a clock, make sure that it can display the correct time zone. https://www.weathershack.com/static/ed-atomic-clock-synch.html

I had the same issue. This s a great clock radio, but not very intuitive. I've uploaded a PDF of the manual from my clock radio, I hope it is useful.

There are many models of Centrios brand alarms. Here is some advice found on the web 1: All buttons are on the back of the clock. To set the time zone, push "menu"; then push "Set" until the correct time zone is displayed (EA = Eastern, PA = Pacific, etc); then push "Menu" again - DONE. To adjust time, date, year & day, push & hold "Set" until the hour begins to flash; then push "Adjust" until the correct hour is reached; then push "Set"; repeat this sequence as the clock moves on to the next flashing segment (e.g. minute, seconds, month, date, & year); the clock will automatically set the Day based upon the Month, Day & Year you select - DONE. 2: Press theSETkey to enter the mode"Manual Time Setting". Manual Time Setting In case the Skyscan Atomic Clock is not able to detect the WWVB-signal (disturbances, transmitting distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock. Note: In 12 hours mode the time will be displayed with an additional"PM"for the time from 12:00 noon until 11:59. 1. The hour digits will start flashing on LCD1. Set the desired hours by pressing the+key followed by pressing theSETkey. 2. Now the minute digits will start flashing. Set the desired minutes by pressing the+key . If the + key is held, the units will increase by 5. 3. Press theSETkey to move to the"Year Setting".

If the disc is not "finalized" it will not play on other DVD players. The steps to finalize the disc are part of the DISC Utilities Menu. under "DISC OPERATIONS". Choose "FInalize DISC". Instructions refer to finalizing DVD=R disc, so you may want to try this type of disc first and see if it works. Says It can be used as DVD-Video disc but results are not guaranteed. You can not edit disc after finalizing, only playback.

https://www.manualslib.com/download/638881/Centrios-4015004.html

So many of these things are made generic and have limited production run. The OEM is not traceable. I would recommend getting the whole set.