Casio Classic - Recent Questions, Troubleshooting & Support

http://support.casio.com/en/manual/manuallist.php?cid=009

click the link below to find a band for your watchhttp://www.watch-band-center.com/watchstrap-h243-For-CASIO.html

You can get instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

It's likely that your band pins are thin and do not have collars that can easily be grabbed by most band removal/installation tools. If you are already changing the band, the best thing to do would be to cut off the band so that the pins are clearly visible, then use a set of nipping pliers to cut the band pins in the middle. At best, you'll cut them in half; at worst, you'll bend the pins into a "V" that will pull at least one end out of their holes. Obviously, you'll need fresh pins with your new watch band.
Efforts to dig the pins out of their holes can easily damage the holes themselves, making the watch useless.

If you haven't got instructions on how to do this, you can get
instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

This little spring is called coil spring and must be inserted in to the hole in movement. Usually there should be writing on movement with an arrow pointing to that hole. If you can not find the writing, then try to put coil spring in different holes one after another, till you hear the watch beeping again.
Rate me, plz.

See page 3 of manual. It may help. User manual Casio G-Shock GX-56BB-1ER (English - 4 pages) QW-3221 (casio.com)

Time is not set correctly. You set the time as AM instead of PM and vice versa. Use the following manual to set time correctly. QW-5479 (casio.com)

I know this an old thread but... What anonymous above said... Go into hand settings mode and set all hands to 12 then press A to exit... Have a good read of the hand setting section in the manual how to do this and it will become clear.. Your time should be correct after this, if it's still out make sure your GMT offset is correct and update the time via radio control. All should be well. It's kind of complicated but once you've done it it's easy! One thing about this watch that's annoying.. It doesn't seem to have an hourly chime ??

You may find a solution here:

http://world.casio.com/wat/download/en/manual/

If it does not work, use casioworld button on same page as it may help.


Rate me, please.