Casio Ceptor - Answered Questions & Fixed Issues
My watch Casio 4723 is one hour fast after
I know this an old thread but... What anonymous above said... Go into hand settings mode and set all hands to 12 then press A to exit... Have a good read of the hand setting section in the manual how to do this and it will become clear.. Your time should be correct after this, if it's still out make sure your GMT offset is correct and update the time via radio control. All should be well. It's kind of complicated but once you've done it it's easy!
One thing about this watch that's annoying.. It doesn't seem to have an hourly chime ??
12/25/2023 1:47:19 AM •
Casio Wave...
•
Answered
on Dec 25, 2023
•
347 views
Reset itslelf. WIll not display correct time, day, or year
My Casio wave ceptor keep resetting itself like this when the bottom right (D button) is pressed. I need to make sure I reset the city code or before trying to receive as it defaults to Tokyo. Press & hold the top left (A button) and date changes to city code. Scrole through codes using right bottons.
Hope this helps.
Nick
4/10/2022 6:42:47 AM •
Casio Wave...
•
Answered
on Apr 10, 2022
•
14,404 views
I am going to Moscw
You can change the location by pressing the mode button until you reach the city setting and then use the button at 4 o'clock to change the city until you reach the abbreviation for Moscow (MSW I think -it should be obvious if the watch it showing the correct local time.
Then press the mode button to return to normal time keeping mode.
Enjoy your trip!
4/2/2019 7:48:06 AM •
Casio Wave...
•
Answered
on Apr 02, 2019
•
238 views
Casio waveceptor watch, how do i reset it
mcdevito75 here, 1 of the buttons should say MODE, press this button and see the display blinking, NOW! press the set button for each function, after each function is set press MODE to move onto the next function, when all functions are set, press MODE again to see steady display.
11/15/2015 1:37:36 PM •
Casio Wave...
•
Answered
on Nov 15, 2015
•
5,337 views
How do you re3move a link from a Casio watch band
take it to a jeweler and they will send it to casio to remove a link. The clip may have movable anchoring points . You need a pin to push in the pins inside the link on both sides. then move the link and re anchor the band under the clip.
7/4/2015 3:54:20 PM •
Casio Mens...
•
Answered
on Jul 04, 2015
•
375 views
I have a disallignement of 10 minutes between the digital and the analogical time. The digital time is perfect how can I allign the analogical one?
You have to know that analog time "follows" digital time.Any hour/minutes correction on the display has direct effect on time/minutes hands.Some times, mostly after battery replacement,hands might have declination.That is why there is a function so called "Hands home position adjustment".Using this function you can align both hands to 12/00 position.If there is any declination (I think is your case) you can correct.Try to enable this function by pressing for 4-5 sec the upper left button(A) until "HAND SET" appears.If hands are not aligned exactly to 12/00 position, you must correct by pressing the lower right button (D) for forward movement or the upper right button (B) for backward movement.In fact, minutes hand is aligned,hour hand follows.When both hands are set to 12/00 (home position) press button A again.Time Mode returns to the display.Normally hands will now show exactly according to digital (display) time.I hope this will help.
How to replace the battery?
I take mine to a watch dealer to get the right, freshest battery from someone with the right tools to install it. Peace of mind.
3/3/2015 12:21:12 AM •
Casio Wave...
•
Answered
on Mar 03, 2015
•
244 views
I have a 3054. About
This same problem (watch resetting to 1/1/205) has happened to me 2x now, about 2 months or so apart.
I have had this watch for ~10+ years now, and works perfectly.
I have replaced the battery 2x.
Again, the watch works great.
I just realized that in the .pdf manual, there is no indication for a "low-battery" condition.
I am guessing that the "low-battery" is what is causing the watch to reset the date/time to 1/1/2005.
Any others having this same problem if this watch resetting to 1/1/2005 after the watch has run just great (auto time syncing, etc.)?
This watch Keeps great time!
Buster Brown
12/30/2014 10:53:54 PM •
Casio Wave...
•
Answered
on Dec 30, 2014
•
999 views
How do I receive signal from ft Collins
The Casio wave scepter watches often got put on sale because the booklet was thick and the sales staff inside their steel shell stores could never prove how it worked. I bought 3 from Sears at a low price.
Ok, I am in northern ontario, and I set the watch around a non metal tube or box - like a paper towel roll or small pop bottle and set it on a south or west facing window ledge. Works best on a top floor. Position the watch so the 12 is pointing to Fort collins.
My casio at this distance doesn't pick up the radio signal until sometime between midnight and 6 am. It has a setting that reveals if it did sync and reset the time, and will show at what time it sync'ed.
casio watch manuals are available online. As long as you have set what time zone you are in, it will set the time.
12/11/2014 1:18:23 AM •
Casio Wave...
•
Answered
on Dec 11, 2014
•
360 views
Why does my autolight on gshock doesnt work
Read the manual that came with the watch.
The battery could be too low. Try it in complete darkness (closet) and see if there is any glow at all.
Make sure you are pressing the correct button.
6/25/2014 1:46:49 PM •
Casio Wave...
•
Answered
on Jun 25, 2014
•
238 views
Waveceptor reset
I have a number of these Casio and Citizen watches. This watch does not use GPS for the time keeping. It uses a land based broadcast time signal. There is public information about where the signals come from for your area. The technical breakdown of the time code signal is public access information.
The instruction manual of the watch has the information about when your watch should automatically receive the time signal, and how to set up the watch. Many of the manuals also included a map showing the time signal coverage, and includes the time of day information to show when the signal is strongest.
Make sure the watch settings are for your time zone. This is important. If the main time zone is not for your area it will be trying to receive the signal at the wrong frequency at the wrong time of day. There are areas where the signal may not be able to be received. You can get the mapping for this from the service that the watch has been set to use.
In North America the auto time receive is supposed to take place between midnight 00:00 to 04:00. In the eastern part of North America the reception is poor compared to central and western part of North America. Check the instruction manual for your watch for details.
Below is the spec listing of your watch.
- Atomic Timekeeping
Receives time calibration radio signals which keep the displayed time accurate
Auto receive function (3 times per day)
Manual receive function
Signal: WWVB, UK MSF Frequency: 60kHz
- 50M Water Resistant
- EL Backlight with Afterglow
- World Time
29 times zones (30 cities), city code display, daylight saving auto/on/off
- Date Alert
Display flashes when set date is reached
- 4 Daily Alarms and 1 Snooze Alarm
- 1/100 second digital stopwatch
Measuring capacity: 99:59'59.99"
Measuring modes: Elapsed time, lap time, split time, 1st-2nd place times
- Hourly Time Signal
- Auto Calendar (pre-programmed until the year 2039)
- 12/24 Hour Formats
- Accuracy: +/-20 seconds per month (with no signal calibration)
- Battery CR1620
- Approx. battery life: 2 years
- Module 2556
Size of case / total weight
WV57 47.0 x 39.0 x 12.5mm / 44g
WV57HD 47.0 x 39.0 x 12.5mm / 89g
5/19/2014 6:53:11 PM •
Casio Wave...
•
Answered
on May 19, 2014
•
658 views
My Casio Wave Ceptor 3054
My Wave Ceptor also reset to 01/01/05 four days ago. I've had it for more than a year and this is the first time it's happened. It hasn't reset with automatic updates and I can't get it to manually update.
5/4/2014 4:54:12 PM •
Casio Wave...
•
Answered
on May 04, 2014
•
2,350 views
Not finding what you are looking for?