Casio Ceptor - Recent Questions, Troubleshooting & Support - Page 3
12 hours ahead
I think you have the wrong time zone selected. Some zones are 30 min. off the rest. just in case
Instruction book page E-23. To turn auto receive on or off. In Timekeeping mode press D (Lower right) to display last Signal screen. It should say GET at the bottom and show the last time it updated. (Or ERR) Hold down A until the receiving indicator and current auto receive setting (ON or OFF) start to flash. Press D to toggle auto receive on. A again to end.
If you tried to make it receive manually this will be turned off. If the GET screen said ERR then it did not update and auto receive would still be off. I had to do the manual thing about 20 times before it updated. A upper left C lower left D lower right A upper right (light)
My Casio wave ceptor EQW-M100D has started to show
Instruction book page E-23. To turn auto receive on or off. In Timekeeping mode press D (Lower right) to display last Signal screen. It should say GET at the bottom and show the last time it updated. (Or ERR) Hold down A until the receiving indicator and current auto receive setting (ON or OFF) start to flash. Press D to toggle auto receive on. A again to end.
If you tried to make it receive manually this will be turned off. If the GET screen said ERR then it did not update and auto receive would still be off. I had to do the manual thing about 20 times before it updated. A upper left C lower left D lower right A upper right (light)
12 hours early
Try this:-
First set the watch to 24 hour format rather than 12 hour format.
How to reset casio watch
That is a strange question. Usually you set a watch to the current time and date. Use the manual. With the module number in hand, you can visit the Casio world website to download the manual for the module of your watch.
Will not receive signal
If you are in the US or Canada the signal is coming from Fort-Collins, Colorado. If you are too far or there are atmospheric perturbations along the way, at the times the watch is in automatic receive , the watch may not receive a strong enough signal to synchronize itself with the atomic clock signal. The watch is not always able to do so.Read the manual where it is suggested that you put the watch on a window sill, the dial facing outward with 12 at the bottom. Do not move the watch when it is trying to receive a signal. If you have a signal strength meter, orient the watch so that the signal is as high as possible.
Not finding what you are looking for?