Casio Answered Questions & Fixed Issues

https://www.manualslib.com/manual/268824/Casio-Ctk-573.html?page=10#manual ck this...hope it helps Best to you

The AN8054 is an integrated circuit used in the Casio Tone Bank M120 keyboard. If it has been blown off, you will need to replace it. An equivalent replacement for the AN8054 is the LM358N, which is a dual operational amplifier that can be used as a substitute. Other equivalent options you can consider include the LM741, LM7808, and LM324. It's always recommended to check the datasheet of the substitute IC to ensure it meets the specifications and requirements of the original IC.

To print at the top of the receipt on a PCR-T465 Casio cash register:1. Turn the machine on2. Press the "Menu" button3. Use the up/down arrows to select "Header"4. Press the "Enter" button5. Use the up/down arrows to select "On"6. Press the "Enter" button7. Enter the text you want to print at the top of the receipt using the keypad8. Press the "Enter" button9. Press the "Menu" button to exit the menu.Your header should now be set and will print at the top of each receipt.

Setting the date on a Casio G-Shock watch can vary depending on the specific model you have. However, in general, you can follow these steps:

1. Make sure the watch is in timekeeping mode. Press the button at the 2 o'clock position to enter the timekeeping mode.
2. Press and hold down the button at the 4 o'clock position. This will activate the settings mode.
3. Use the button at the 2 o'clock position to navigate to the "Timekeeping" or "Time" setting. Press the button at the 4 o'clock position to select it.
4. Use the button at the 2 o'clock position to navigate to the "Adjust" or "Setting" option. Press the button at the 4 o'clock position to select it.
5. Use the button at the 2 o'clock position to navigate to the "Date" option. Press the button at the 4 o'clock position to select it.
6. Use the button at the 2 o'clock position to adjust the date. Press the button at the 4 o'clock position to confirm the date.
7. Press the button at the 4 o'clock position again to exit the settings mode. Your watch's date should now be set.

Note: If your watch model has different button configuration, please refer to the user manual for the specific instructions.

Help in the link, but you may have a sticky key on that reed instrument. lots here https://www.google.com/search?q=casio+ctk-574+factory+reset A video here

If an IBM Toshiba SurePOS 4852-580 15 cash register that you purchased used is not allowing you to make any changes and says "unauthorized," there could be a few possible causes:

1. The cash register may be locked by a previous owner: The cash register may have been locked by the previous owner with a supervisor password. You will need to obtain the password to make changes.
2. The software may be outdated: The software may be out of date and require an update. You will need to contact IBM for assistance with this.
3. The system may have been tampered with: The cash register may have been tampered with, which could have caused the system to become locked and require a service technician to reset it.
4. The cash register may have a security feature enabled: Some IBM Toshiba SurePOS have a security feature that allows only authorized users to make changes. You will need to contact IBM for assistance with this.
5. The cash register may have an issue on the hardware: some issue on the hardware of the device could be preventing the device from functioning properly.

Question edited to get title correct for full make and model designations. Lots of help here using the Google 'versus' trick https://www.google.com/search?q=Casio%27s+Privia+PX-120+vs+Casio+CDP-S100 ..

The issue you are describing with your Casio module 4722 watch in the HM (hand setting) mode sounds like a mechanical problem with the watch movement. It is possible that the gears or other internal components that control the movement of the hour and minute hands have become damaged or jammed. This problem could be caused by a variety of factors such as impact, moisture, or wear and tear. In order to fix this issue, it is best to take the watch to a qualified watch repair professional who can diagnose and repair the problem. They can determine if the problem is a minor one that can be fixed quickly or if a more extensive repair is needed. It's also a good idea to refer to the manufacturer's manual for troubleshooting steps and warranty information, as some issues may be covered under the warranty.

It sounds like you may be experiencing issues with the sustain pedal on your Casio CDP-100 digital piano. The problem may not be with the pedal itself, but with the internal connections or circuitry of the piano. If you're unable to factory reset the piano and it's not responding to the sustain pedal, it's likely that there is a problem with the main board. This is a complex issue that may require professional repair. However, before giving up on it, you can try the following steps:

1. Check the connections: Make sure that all of the connections between the pedal, the piano, and the power supply are secure and that there is no damage to the cables.
2. Check the power supply: Make sure that the power supply is working properly and that the piano is receiving power.
3. Try to update the firmware: Check if there is a firmware update available for your piano on the Casio website. Updating the firmware may fix the problem.
4. Check the manual: Consult the piano's manual for troubleshooting steps, it may have some information that can help you.

If none of these steps work, it is likely that the problem is with the main board and it will need to be repaired by a professional technician. Unfortunately, this can be an expensive repair. Keep in mind that attempting to repair a digital piano can be dangerous if you're not familiar with the proper procedures and safety precautions. It's important to keep in mind that the piano was second hand and you were aware of a problem with it and you have been given a lower price as a result. It is also important to note that buying second hand musical instruments may have hidden issues, which is why it's always advisable to inspect it thoroughly before buying it or to buy from a reputable seller who can give you a warranty. Regenerate response

To load paper into the Casio DR-T220 thermal printer calculator, follow these steps:

1. Open the printer cover by pressing the release button located at the front of the calculator.
2. Carefully insert the roll of thermal paper into the printer with the paper facing forward, and the end of the paper coming out of the top of the roll.
3. Adjust the paper guide to fit snugly against the paper roll.
4. Close the printer cover.
5. Turn on the calculator and press the "Feed" button to advance the paper to the correct position for printing.

Please Note: Be sure to use the correct type of thermal paper for your calculator, as specified in the user manual.

If your Casio Celviano AP-65 turns on but there is no sound, there could be several possible causes for this issue. Here are a few steps you can try to troubleshoot the problem:

1. Check the volume: Make sure that the volume on the piano is turned up and that the volume control on any external speakers or amplifiers is also turned up.
2. Check the connections: Make sure that all cables and connections are securely plugged in and that there are no loose or damaged cables.
3. Check the power supply: If the piano is plugged into an outlet using an extension cord or surge protector, try plugging it directly into the wall to eliminate any issues with the power supply.
4. Check the internal speakers: If the piano has internal speakers, make sure that they are not damaged or malfunctioning.
5. Check the settings: Make sure that the piano is set to play through the internal speakers or any connected external speakers or amplifiers.

If these steps do not resolve the problem, it may be necessary to have the piano inspected by a professional. They will be able to diagnose the issue and recommend the appropriate repair.

Like your Yamaha midi needs drivers. https://www.solvusoft.com/en/update/drivers/music-keyboard/casio/privia/px-120/model-numbers/

Hi :). Are you referring in Casio Cleviano model AP-33? Because i try to search for Casio Cleviano but there is no result. the only available is the model for Casio Cleviano model AP-33. Casio AZ 1 Service Manual Parts List Page 6 . I hope this link can help you to find out the manual for your casio model. thanks

There are a few potential reasons why the figures on your Casio HR-150TM printing calculator are overlapping:

1. The paper roll may not be loaded correctly. Make sure that the paper roll is loaded correctly and that the end of the paper is properly aligned with the paper guide.
2. The paper roll may be running low. Try replacing the paper roll with a new one.
3. The print head may be dirty. Clean the print head with a dry cloth or a small brush to remove any debris.
4. The ribbon may be worn out. Replace the ribbon if it appears to be worn out or damaged.
5. The calculator may not be level. Make sure that the calculator is on a level surface to ensure proper printing.
6. The calculator may be malfunctioning. If the above steps do not resolve the issue, the calculator may be malfunctioning. Contact the manufacturer or an authorized service center for assistance.

If the problem persist, it's recommended to check the user manual for troubleshooting steps or contact the manufacturer for further assistance.

Working

Question edited for clarity. Question moved from Cars and Trucks.

Casio Collection Watch Batteries for all Models

https://casiofanmag.com > topics > casio-batteries Casio Watch Line: Collection Battery type: CR2016 Battery price: 6$ [average Amazon price. We may earn a commission on qualifying purchases from our links to ...

It sounds like there may be an issue with the movement of the second hand on your stopwatch. There are a few possible causes for this problem. One possibility is that the battery in your stopwatch may be running low and needs to be replaced. Another possibility is that there may be a problem with the mechanical movement of the stopwatch. This could be due to a loose or broken part, or it could be a result of wear and tear over time. To troubleshoot the issue, you could try replacing the battery in the stopwatch to see if that resolves the problem. If the problem persists, you may need to have the stopwatch serviced by a professional watch repair technician. They will be able to diagnose the problem and repair or replace any faulty parts.

Theres no reset that i know of. Have you checked the power box (plugs into the AC outlet) voltage and that it is working as it should?

To adjust the dual time on your Tommy Hilfiger watch model 1791709, follow these steps:

1. Press the "Mode" button to enter the dual time mode. The dual time mode is indicated by the small "D" at the top of the display.
2. Hold down the "Adjust" button for a few seconds until the hours digit starts flashing.
3. Press the "Adjust" button repeatedly to adjust the hours of the second time zone.
4. Press the "Mode" button to move to the minutes digit, which will start flashing.
5. Press the "Adjust" button repeatedly to adjust the minutes of the second time zone.