Casio Logo

Casio Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 3K Products
  • 88K Answers
  • 3M Views

This reset trick works with other Casio Alarm Chrono digital watches, such as my old Model W-720, similar to your F91-W. After the new lithium coil cell is installed and secured with the spring clip, the watch may show random segments in the LCD display or may simply be blank. Insert a sewing needle, paper clip, or blade of a small jeweler's screwdriver into the hole on the back of the movement stamped "AC" (All Clear) to momentarily connect the gold plated contact at the bottom of the hole to the stainless steel battery clip. The battery clip in most such Casio watches is connected to the "+" terminal of the coin cell. This will reset the CMOS chip and it should start up with the watch displaying 12:00 and the date at 1-1. Then, use the control buttons to set the time and date in the normal fashion.

Casio F91W-1... | Answered on Nov 14, 2018


Press [SHIFT][DEL] (INS) to toggle between INS and Overwrite. The cursor will change from a horizontal line to a vertical one.

Casio FX9750GII... | Answered on Nov 14, 2018


In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed.

2. Hold down A for about two seconds until the alarm time starts to flash. This is the setting mode.
3. Press C to move the flashing between the hour and minute settings.
4. While a setting is flashing, use D (+) and B (-) to change it.
  • When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (no indicator) or p.m. (P indicator).
5. Press A to exit the setting mode.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
To turn an alarm and the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select an alarm or the Hourly Time Signal.
  • When the alarm you want or the Hourly Time Signal is displayed, press A to toggle it between on and off
  • The alarm on indicator (when any alarm is on), snooze alarm indicator (when the snooze alarm is on), and the Hourly Time Signal on indicator (when the Hourly Time Signal is on) are shown on the display in all modes.
To stop the alarm
Press any button.

Casio Watches | Answered on Nov 13, 2018


you nearest casio dealer may have one in the back of the store,
many buyers don't want/need the manuals so some stores hold on to them for such occassions

Casio LK-100... | Answered on Nov 11, 2018


Sounds like you are overloading the capabilities. Basically, you have too many notes sounding at once. It doesn't have a massive amount of polyphony.

Casio Music | Answered on Nov 09, 2018


search for it online or find a store

Casio Watches | Answered on Nov 05, 2018


3^97mod353

Casio Office... | Answered on Nov 04, 2018


https://www.amazon.com/casio-keyboard-sustain-pedal/s?page=4&rh=i%3Aaps%2Ck%3Acasio%20keyboard%20sustain%20pedal

Casio Music | Answered on Oct 31, 2018


I haven't seen an 8000 with a super board. I thought they were a thing of the past but it looks like they have brought them back. If you want to use it as a standalone machine, it will depend upon whether the firmware has been changed when the super board went in. Sometimes the machine cannot be used in any other configuration without a dealer removing the super board and re-flashing the IPL. the super board version should come with a special after market manual which will show you the configurations you can use. Otherwise, have a dealer check it for you. -------------------------------------------------------------------------------------------------------------------
If anyone is looking for Casio TE-8000F manuals, C-tech has them here: http://the-checkout-tech.com/manuals/cashregisters/Casio5.php

Casio Parts Cash... | Answered on Oct 31, 2018


If you open up the case and look at the rear of the keys, I expect you will see that there is a small spring connected to the rear of each key. i suspect the unit was dropped in transit and some of these springs have popped off. If so, just reattach them using a pair of needle nose pliers. If however it was dropped hard enough to break the fingers that the springs attach to you'll have to replace those keys. This may be a repair shop job. it may also not be cost effective to do the job. Good Luck!

Casio Music | Answered on Oct 30, 2018


To convert a single result to decimal, press the S<=>D button just above the DEL button. To have all results come out in decimal, press SHIFT MODE 2 to switch to the LineIO mode.

Casio FX-115ES... | Answered on Oct 30, 2018


Failure to recharge completely could be a sign of a failing battery.

Casio Mens... | Answered on Oct 29, 2018


mcdevito75 Here, The battery could be loose makeing a weak connection or the LCD screen could be going bad, Have a small watch repair shop in your area check it out. If you can do so yourself be very carefull as too much pressure on the battery (PRESSING) could destroy the LCD face of the watch, also if the display (FACE) of your Casio ever goes black, even if display returns, the LCD is going bad.

Casio G-Shock... | Answered on Oct 29, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Casio Experts

k24674

Level 3 Expert

8081 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Marvin
Marvin

Level 3 Expert

84529 Answers

Are you a Casio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...