Casio Music - Recent Questions, Troubleshooting & Support

You can find the software for Casio LK-70S here: .Look for the driver for the keyboard under the Digital Keyboard/Piano (excluding the PL-40R). Select the appropriate link and then scroll down to the Download button. Another file is the SMF converter. The conversion software is here: . Scroll down to find the download links. This software works with Microsoft Windows 98 SE, Windows XP (32-bit) and Vista (32-bit).

I hope this helps.

Cindy Wells

Casio Music | Answered on Mar 09, 2019

It is 3 years/5 years warranty depending on your country.
Call CASIO warranty or contact dealer.

Casio Celviano... | Answered on Feb 21, 2019

The main circuit board has failed. Will Cost about 300-400 dollars to replace if not still under warranty.

Casio AP-620... | Answered on Feb 21, 2019

You don't need to reset factory.
You just need to change the setting of LOCAL CONTROL.
Lets start :::
While holding TONE / SETTING button,press key D#7 at 7th octave (highest octave on the right hand). Then release. That's all.
Then the sound must be heard..


Casio PX120... | Answered on Feb 14, 2019

Try a different pedal. If that does not work try replacing the input jack.

Casio Music | Answered on Feb 11, 2019

Casio CDP has Auto Power Off: 30 minutes after last key operation, Auto Power Off can be disabled.
Please read the manual.

If it turns itself off while playing, I would try to buy a new AC Adapter to test. DC cable of AC adapters are often broken internally after much "bending".

Casio Music | Answered on Jan 14, 2019

You need first of all to remove the cover, access the keybed, remove from keyboard base and then you will be able to remove a key - it is impossible without following this procedure.

Casio Music | Answered on Jan 10, 2019

Casio Privia... | Answered on Jan 02, 2019

This doesn't answer your question directly but may help if you decide to get another pedal.
I had a Casio keyboard for a while, and found that the polarity of the sustain pedal was the reverse of that on most other makes. This meant that when I bought another pedal (not Casio), it sustained when not depressed, and did not when depressed. To correct this all I did was to cut the cable near the pedal, reverse the wires, solder them back and cover with nice electrical tape.

By the way if you use SEABOARD or MAINSTAGE then there's a different trick (avoiding cutting wires) on this link:

If this wasn't completely useless then please give this a good mark! Thanks.

Casio Music | Answered on Dec 29, 2018

Google (casio)(ctk-150)(manual) without parens.

Casio Music | Answered on Nov 25, 2018

Not finding what you are looking for?
Casio Logo

863 questions posted

Ask a Question

Usually answered in minutes!

Top Casio Music Experts

Ben Armstrong

Level 2 Expert

360 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6825 Answers

Are you a Casio Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides