Casio Exilim - Popular Questions, Answers, Tips & Manuals

Look it up on Google

Many Casio Digital camera manuals are available here: https://world.casio.com/manual/dc/ . Check the full model number since 10.1 indicates the effective number of pixels on the camera sensor. Select your preferred language and then use the drop-down menus to select the full prefix and then specific camera model. There are several Exilim 10.1 MP cameras, including the EX-Z29 and EX Z33. The current link to the Exilim EX-Z29 (North American version) manual in English is https://support.casio.com/en/manual/001/EXZ29_MF_FB_na_EN.pdf . I hope this helps. Cindy Wells

Let the camera dry out completely. If it was not salt water it may be ok. Put it in a warm dry place for a long time. It may take weeks for the insides to get dry.....remove the battery while doing this if possible.

Try downloading them to the computer first and then print them from there.

Take it in for a checkup. Something broken or loose. Only experienced camera techs can fix.

Most likely the arrow key switch is broken or the contacts are corroded. If it's a snap-button switch, it needs to be replaced. If this is bad, I recommend replacing the others also. If it's a conductive rubber button (like most TV remote controls), the conductive patch on the inside is worn and needs to be repainted with carbon/silver conductive paint. A miniature snap-button switch is generally less than a dollar from Mouser Electronics - soldering skills are required for replacement. Conductive paint for rubber button switches is $10.45 for a 1 gram tube. It has a very limited shelf life once it's opened, so use up the rest on the other camera buttons, and the power, channel and volume buttons on your favorite TV remote control (if you can get it apart without breaking the case) . Cameras are typically difficult to take apart for repair. You'll have to consider the value of the camera versus the effort to get to the control buttons. The electronics inside are sensitive to static electricity damage, so you should work on an anti-static mat and use an anti-static wristband with it..

I looked up the PDF for your camera, and it says: "use only an SD memory card or a Multimedia card with this camera. Proper operation is not guaranteed when any other type of card is used." I did not see a maximum size listed, but some cameras only accept 4GB, some 8GB. I think the important thing is "use only SD card".

All you can do is reset the electronics to factory defaults. Or contact mfg for protocol to accomplish this.

Ibland finns det en liten str?mbrytare p? sidan av SD-kortet som g?r det m?jligt att skriva till kortet av och p?. Om det misslyckas ?r det f?rst med ett annat minneskort.

your camera CCD is gone just replace it near your servive centre https://www.google.co.in/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0ahUKEwjw5aHq67_UAhUKuo8KHSMoDFEQjRwIBw&url=http%3A%2F%2Fwww.ebay.com%2Fitm%2FSAMSUNG-PL100-CCD-SENSOR-FOR-REPLACEMENT-REPAIR-PART-%2F261071736686&psig=AFQjCNGNxusI0WektQaSxFc7lgATrkPq2w&ust=1497615818313040

The manual indicates that the green light flashing once indicates that the camera is powering down. http://www.manualnguide.com/dl/6597/ (see page 218 lamp indications) The first thing you can try is to turn off the camera, remove the battery, remove the memory card. Hold for one minute , pop the battery in(but not the memory card) turn on the camera by pressing the power on buttn and holding it for 15 seconds. This will not only reset the camera but also force the motor to retrace/extend the lens if it is a lens related issue that is causing the camera to shut down. Let me know if you need more help

Contact vendor, arrange refund

Some cameras, as well as having the main battery, also have a 'button-cell' type of battery that holds the system information such as date and time etc. I know not whether yours is one of these, but it should tell you in the manual

It could be that your computer does not have the correct codec to play this format. If you download VLCLan software (free) you may be able to see the images as well.

Yes, but not directly. First upload your pictures from your camera to your computer, then upload from computer to Facebook.

The quickest way is to put the serial number into your search engine. To double check yourself, look thru the images until you see a picture of the camera you own.

All you need to do is slide the battery cover to the Open position, then open the battery cover to access the batteries. If it doesn't open easily you may have some corrosion on the batteries holding the cover closed.

Try formatting card on your computer instead. Use a program called 'SDFormat'.

Digital Cameras - Manuals - CASIO

support.casio.com > Support > Manuals

CasioIn order to use this service to download user's guides and operating instructions (manuals), you must agree to be bound by the following "Terms and Conditions.

Manuals - Support - CASIO

User Manual for Casio Watch Module - My G-Shock