In general Compact Flash Cards have to be formatted within the camera that is using them as they use a format proprietary to that camera. Also there are size limits on cards. If your camera will only take 16 Mb cards and you put a 32 Mb card in, it will not read it. It sees it as 'No Card Present'.
I think the other answer is an AI Answer Bot.
The error 22552 means that the computer has lost its connections with the printer so you have to check first if the connections are right before replacing any of the machines,you may have missed something in between
The setting and password are stored in two files on the internal flashdrive. To reset the device, the two file have to be deleteted or renamed. The Canon ScanFront 220 has a more or less normal PC mainbord with AMI-Bios.To boot from a USB-Stick, connect a keyboard and press del while starting. You get access to the bios settings. Change the boot order to USB-hdd.As a bootable USB-stick, I used an old 4GB stick, formated with fat32, made it bootable with https://rufus.ie/ and https://www.freedos.org/. I also copied norton commander on the stick for comfort.Boot Freedos. To navigate you will need the commands d:, cd, dir and rename.Drive D: is now the internal Flash drive. Enter the DOCUMENT folder and rename/delete the file system.hv and in the folder DEFAULT the file user.hv.Remove USB-stick and reboot.Change the boot order back to hdd.Done. When rebooting in the internal system, the first step is to calibrate the touchscreen.Have fun.Edit: to rejuvenate the rubber wheels, soake them in alcohol.
i kindly recommend you reset teh camera ,also check battery contacts inside the camera and on the battery itself are clean and free from dirt or corrosion.In addition,you can alos buy a new battery
Here are some actions you can take to investigate and solve the issue.
a) Double-check to make sure the toner catritdge it is inserted properly and firmly into the printer.
b)Considering that you mentioned replacing the fuser unit, make sure it was placed properly.
c) thoroughly clean the printer's inside, including the rollers and paper path.
Unfortunately, Canon does not support the Laser Shot LBP1120 under Windows 10. It was only supported through Windows 8. There are Unix drivers available here: https://www.canon-europe.com/support/consumer_products/products/printers/laser/laser_shot_lbp1120.html?type=drivers&language=en&os=windows%2010%20(32-bit) . Since the Laser Shot LBP1120 was released with Windows 98/Me, Windows 2000 and Windows XP drivers, Canon supported this printer for over 10 years. If your system has sufficient memory and virtual machine support (BIOS or UEFI), you could try using a virtual machine with Windows 7 (with appropriate license) or a supported version of Unix/Linux to run the printer. Alternatively, create a dual boot machine with one of those OS versions on the computer.
I wish that I had better news for you.
Cindy Wells
(Another alternative is to write your own driver (or find a programmer who will do that). I don't write drivers myself.)
The error code E00807-0001 on a Canon imageRUNNER Advance C5235 indicates a problem with the fixing assembly, which is responsible for fusing the toner onto the paper. Here are some steps you can try to troubleshoot and resolve the issue:
Power Cycle: Turn off the printer using the main power switch, which is usually located on the side or rear of the machine. Wait for a few minutes, then turn the power back on. This can sometimes clear temporary errors.
Check for Paper Jams: Open the printer's front cover and check for any paper jams or obstructions in the paper path, especially around the fixing assembly area. If you find any paper jams, carefully remove the paper following the manufacturer's instructions.
Inspect the Fixing Assembly: The fixing assembly is located inside the printer, typically behind the front cover or access panel. Check for any visible signs of damage, such as broken parts or loose connections. Ensure that the fixing unit is properly seated and securely in place.
Reset the Fixing Assembly: If there are no visible issues with the fixing assembly, try resetting it. Open the front cover and locate the green handle or lever associated with the fixing assembly. Move it back and forth a few times to ensure it is properly engaged.
Contact Canon Support: If the error persists after attempting the above steps, it is recommended to contact Canon's customer support or a qualified technician for further assistance. They will have access to specific troubleshooting steps and can provide guidance based on their knowledge of the Canon imageRUNNER Advance C5235 model.
When contacting support, be sure to provide them with the specific error code and a description of the issue you're experiencing. This will help them in diagnosing the problem more accurately and providing appropriate solutions.
Please note that the error codes and troubleshooting steps may vary depending on the specific model and configuration of your Canon imageRUNNER Advance C5235 printer. Always consult the printer's user manual or contact Canon's customer support for model-specific instructions and recommendations.
The Canon imageRUNNER ADVANCE DX C3835i error code E000202-0010 indicates a problem with the fixing film rotation. Here's some information about the potential causes and steps you can take to address the issue:
Fixing Film: The fixing film is a component within the fixing assembly responsible for transferring heat to the paper during the printing process. It's possible that the fixing film has become damaged, worn out, or needs replacement. Inspect the fixing film for any visible signs of damage, such as tears or wear. If necessary, contact Canon customer support or a qualified technician for assistance with replacing the fixing film.
Fixing Assembly: The error code can also be caused by a malfunction in the fixing assembly itself. The fixing assembly consists of various components, including the fixing film, upper roller, lower roller, and temperature sensors. If there is a problem with any of these components, it can trigger the E000202-0010 error code. In such cases, it is recommended to contact Canon customer support or a qualified technician for further diagnosis and repair.
Power Cycle: Sometimes, a simple power cycle can help resolve temporary issues. Turn off the printer, unplug it from the power source, and wait for a few minutes. Then, plug it back in and power it on again to see if the error clears. If the error persists after the power cycle, further troubleshooting or repair steps may be necessary.
It's important to note that the E000202-0010 error code is specific to Canon imageRUNNER ADVANCE printers, and the exact steps or recommendations may vary depending on the specific model and configuration of your printer. Consult the printer's user manual or contact Canon's customer support for more accurate and detailed instructions tailored to your specific printer model.
Overheating Print Head. Probably needs replacing.
If your printer displays a displays a B200 or related (B201, B202, etc.) error, this means that the print head built into one or both of the ink cartridges has overheated.
Feb 24, 2023
JustAnswerhttps://www.justanswer.com > printers > jl83k-error-co...
Jun 15, 2022 - The B200 series error (including B201) indicates that "Print head Temperature exceeded" or "Cartridge failure". This happens when you were ...
1 answer ยท Top answer: Hi and Welcome to JustAnswer.com! My Name is ***** ***** I look forward to assisting you today ...
Canon Globalhttps://support.usa.canon.com > ...
Apr 27, 2020 - error, this means that the print head built into one or both of the ink cartridges has overheated. You can attempt to replace the ink cartridges ...
Description: Center Thermistor low temperature detection at printing
In the period from printing to last rotation, Main Thermistor 2 detected a temperature of 80 deg C or lower for more than 1 second.
Remedy: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Replace the Fixing Assembly 3. Replace the DC Controller PCB (UN09) NOTE: After performing the above remedy work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR