Canon FS - Popular Questions, Answers, Tips & Manuals - Page 7

Canon does not support basic software to actually download your video back to your PC. It is propritary software, and it is not available from the Canon poorly run web site. i.e. It is completely worthless by itself

Hi,

To enable date and time while recording...

Click on hte MENU and choose DISPLAY SETUP.
From display setup select DATA CODE and choose DATE AND TIME.

By doing this you can enable date/time while recording..

Please leave me comment, if you need futher assistance
RNJ VINODKUMAR

I took the camera to the representative and we started various tests such as:
Tried My battery in OTHER camera .... not working
Tried OTHER battery in MY camera .... works
Tried charging MY battery in OTHER Camera .... works
Tried MY battery in MY camera and charged .... worked
Bottom end is that my charger is not working although it heats when "charging".

Now i will look at the pins in the charger to see if they are working or not.

Whatever the case .... getting a new charger.

Try this link, and choose your operating system. Hope it helps. http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=2547&modelid=16184

I would like to share you a best converter i have used:
Video Download Studio
Click here to see the full reviews and have a free trial:
http://www.downloadvideos-convert.com/download-videos-music
It can convert almost any the video format to another with high output quality.
This full-featured video converter software also can help you:
1.convert between all mainstream video and audio formats,such as(mp4, mov, m4v, vob, XviD, avi, flv, 3gp, 3g2, mpg,wmv,etc;m4v, mp3, wav, ac3,etc)
2.extract audio tracks from video files to other audio formats
3.support all popular portable multimedia players
4.edit video-Merge, Trim, Crop and Snapshot
It is very easy to use,just follow the instructions on it you can convert your videos and make your movies and music taken easily on PSP, PS3, iPod, iPhone, Apple TV, Xbox or other digital devices.
Hope this can help you.

This from Canon support relating to the HF10. Replacing the first 3 digits with 808 worked for me; Dear Mr , Thank you for contacting Canon. I am uncertain as to what you are trying to register for. Therefore the following two procedures may not work for the registration you are trying to complete. You should first try the prefixes 21, 22, 23, 24 (one at a time) in front of your serial number, these are regional prefixes which are applied to serial numbers for region specific products for software registrations. Alternatively you can replace the first 3 digits of your serial with the characters 808. This can help with warranty registration and the canon image gateway. Pixela Support - 00 800 1532 4865 (international toll free number) - 01489 564 764 (Uk number)

The subinstaller is a program that launches the screen from where you can select to install all the applications available in the disk. You need not install the subinstaller as it itself is an installer for different applications and drivers on the disk.

Are you connecting the audio RCA cables to the camera and TV and selecting the correct audio input ?

I had a similar problem with missing audio. In my case I am using a surround sound audio system and had to connect the audio cables directly to the Suround sytem and change the audio input.

USB bad. If the footage is on hard drive rather than tape just browse the camera or import rather than capture. If difficulties seeing the hd maybe use a card reader known to work with mac. If it is on DV tape you need to connect to a dv / hdv out to fire wire, if this camera doesn't have one you will need to borrow some one's who does.

Hi

Thanks for using FixYa. First check whether the disk was finalised. Usually the disk is finalized before ejecting, otherwise the data can get deleted. You can browse the dvd through finder window, and you'll be able to read all the videos and pictures stored on your DVD.


Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee

Hi - if the labelling is the same as my FS200 then the serial number is on a white label on the flap of the battery compartment - on mine it's a 12 figure number given in 3 rows of 4 figures, like this...
1234
5678
9012

use external capturing card

We have this lcd in stock for relacement

yutt

http://onlinevideodownloader.net/save-canon-fs100-video-on-ipod.html
I believe this post will offer you an excellent answer.
hope it can help you more or less!

Most cases, with apple product, I did not have much problem compare to PC computers. I'm not a Mac user but we do have hookup at the shp and simply we use iMovie program to edit and test equipment. Here is how we do it. 1. Set the camcorder at VCR mode and play short portion for a few time for operation. 2. open iMovie program, 3. hook up the firewire cable. If this procedure did not produce the connection, you may have a hardware problem. -James

I experienced the same thing. The compact power adapter is simply the power cord used also to recharge the camcorder. Plug it into the wall at the same time as you have the USB plugged into the computer and it should be able to download.

I, purchased canon FS 10 CAMCORDER. With that Pixla Imagemixer 3 SE for sd the dealer has given. But it has no CD no. Can any one help.

I work for canon at one of there return centers. We get this problem on every model the only way to fix it is by replacing the front cover.

Video to iMovie Converter is an all-in-one DVD video converter to rip DVD and convert video with high conversion speed on Mac OS X for all sorts of mobile players such as iPhone, iPod, Apple TV, Zune, PSP, Xbox 360, PS3, MP4 Player, etc.